Fibrolite is a modern material, the main task of which is thermal insulation. The main advantages of the material are high load-bearing capacity, low thermal conductivity, high resistance to low temperatures. Fibrolit is practical and has a reasonable price - this is the guarantee of its popularity and wide distribution. Experts say that it is impossible to confuse the material with any other, since it has a characteristic structure. In general, the question of what fibrolite is, practically does not arise, since over the past decades, the distribution has acquired global dimensions.
Contents
- Composition
- Application of fibrolite
- Technical characteristics of
- fibrolite Advantages and disadvantages
- Video
Composition of material
Let's pay attention to the composition of fibrolite, its texture for the example of finished products. In fact, the main component is the so-called wood wool, its mass fraction is not less than 50%, but small deviations are possible, often in a larger direction. The rest of the mass part is portland cement( the actual substance of astringent consistency and hydraulic action).It also adds a mineralizer of natural origin. The following material grades are possible: GB -( 1, 2, 3, 4).The porosity decreases with increasing index.
Application of fibrolyte
Fibrolite plates are irreplaceable in the case of processing buildings with wood carcasses. It is convenient to trim the walls from the inside, also arrange partitions. Ideal for floors, as it is a good heat and sound insulator. It is very convenient that you can use fibrolite at any time of the year, has good resistance to moisture, and also note a high biological safety: in fibers and pores insects are not planted, mold and fungus do not appear.
Technical characteristics of fibrolyte
Let's consider technical characteristics of fibrolite on an example of mark GB1:
- density( kg / m3): 360-570;
- water absorption( % for 24 hours): 45;
- modulus of elasticity( MPa): 300;
- thermal conductivity( W / m * K): 0.063;
- specific heat( kJ / kg * K): 2;
- coefficient of vapor permeability( mg / m * h * Pa): 0.13;
- hardness( MPa): 12.
In the article you can see the photo and video review of fibrolite plates.
Advantages and disadvantages of
The main advantage of fibrolite is the effect of its positive properties in combination with a small specific gravity and density. As a result, there is no need to use expensive construction machines: it is easily cut, drilled, installed;Together with this it does not crumble and does not give much dust.
As a result, the whole design is light, breathable, but at the same time, solid and reliable. If you read the reviews, you can come to the conclusion that in terms of price-quality ratio of the best material to date, not find it.
As already mentioned, fibrolite slabs keep the heat in the room well and practically do not miss the sound. It is advisable to use them for finishing rooms with a strong noisiness - for example in garages, basement workshops, etc.
It should be added that the room creates a harmonious microclimate, which is typical for all buildings of wood type. Doctors note the safety of living in such buildings, here you can talk about such properties as environmental friendliness and harmlessness. In addition, you can feel the characteristic pleasant smell, which persists for a long time.
It is important to note the high refractoriness, which indicates the excellent safety of the material. The fact is that when it comes into contact with fire it does not flare up, but smoldering - it does not give much smoke. There are practically no shortcomings. Also note the high service life - up to 50 years depending on the quality of the finished product.
