How to make furniture with your own hands made of wood. We make a beautiful closet cabinet yourself on video lessons.
First you need to decide where the future cabinet will be and what dimensions it will have. Take a tape measure or ruler and make all the measurements - width, depth, height. It is also necessary to draw a drawing of how the cabinet will look inside and out. Drawings can be made in special programs or on a sheet of paper. To save money and place, walls can be used as side or rear panels. But this option is suitable only if the walls are even. It will also be useful to go to the furniture store, and "touch" the wardrobes. Pay attention to the details of the design, accessories, assembly, etc. We have already told you how to make a built-in closet with your own hands without video, but with drawings and instructions, read.
When all dimensions are known, you can start making parts. As the material is better to use imported chipboard, it is stronger. All parts must be cut exactly to size. With the help of a hacksaw, this is problematic. Therefore, in order to save money, it is better to cut the chipboard sheets in a specialized store when buying. The edges of the parts must be handled by the milamine edge. This can be done with an iron heated at medium power. The edge is applied to the edge of the part, from above conduct the iron and all. A minute later, the cooled film can be trimmed with a stationery knife.
All parts are attached to each other and the wall with metal corners and screws. First you need to calculate how many corners you need and where they will be located, so that the wardrobe is durable and stable. The guides for the doors are also fastened with screws. First, the upper rail is installed, and then the lower one is parallel to it. The main thing is to assemble the doors exactly according to the scheme. The guides are set strictly on the level, otherwise the doors will move to one side. If a gap forms between the door and the wall, the door can be adjusted with a special key. The adjustment hole is located on the side below.
If the back wall is a wall, then first secure the shelves and drawers. Then the side panels, and then the doors. If the compartment closet is completely assembled from the sawn-off elements, then first the skeleton is assembled - the back and side walls. Assembly is best done on the floor so that the cabinet is facing down. In this case, special attention should be paid to the back wall. It must be carefully leveled and screwed straight, because it will act as the main element of the frame. After assembling the frame, the structure is lifted and the shelves and boxes are assembled.
Cupboard with your own hands video lessons
From Nikolay Nalimov is presented a video instruction how to properly fill and what to take into account when manufacturing a wardrobe with your own hands.
Another video instruction, recommend suitable materials and give useful advice
Economy version of the closet
