As with their hands to make a mosquito net on the windows - a simple step by step guide

Many of us are trying to save carefully. As a rule, the purchase of mosquito nets would cost not less 1000 rubles. Today, we try to figure out how to make her own hands and substantially save the family budget.

Measurement of mosquito nets

It will be appreciated that the metal frame mosquito netting should be outside of the light opening. In order not to be mistaken with the size and parameters, it is necessary to calculate all the features correctly.

• The first step is to make sure that the luminous aperture you have already added additional 5-7 cm across the surface of future construction.
• Similar calculations are valid only in cases where the frames themselves consist of plastic windows. That is, for wooden or aluminum windows, this procedure does not work and manufacturing of mosquito nets are best left to the professionals.
• Be sure to remove the special caps that cover the drains, because with them is unlikely to succeed put a standard attachment.

Assembly mosquito net

In order to make itself a mosquito net, you need to think carefully about the shopping list in the hardware store. For this you will need the following materials:

1. Aluminum frame profile.
2. Corners in order to connect all the necessary profiles.
3. Metal compounds for fastening the mosquito net. Without such attachments, you can not catch net for the frame. In addition, with their help, you will not break the necessary geometry.
4. Just the very fabric Mosquito.
5. Rubber seals in order to hold fast to the canvas in the frame.
6. Movie, which will roll these seals.

All the necessary materials, you can easily find in any specialized supermarket.

The process of manufacturing the frame mesh - step instruction

Step 1. Hacksaw cut profile. Choose for the tools that will cope with the metal. In order to properly determine the amount, calculated outer dimensions of the grid of the future, is already in finished form. From the parameters obtained necessarily deprive another 60 mm. Also, cut the profile of the crossbar.

Step 2. Collect rectangular frame mosquito netting. To do this, please create a profile in the corners, neat movements hammer.

Step 3. Mosquito fabric should be put on the frame so that it protrudes slightly beyond the edge of the frame itself.

Step 4. The future of the web does not puff up and gather in the folds. For this rubber cord tucked into the profile on the web. Many experts recommend to do this with a simple screwdriver or knife stationery.

Step 5. Install the handles. You can do this even at a time when the roll up the cord. Make it more convenient at this stage, so you do not have to pull out the material.

To aesthetic surplus mosquito fabric is cut with a knife stationery.

Installing mosquito nets

Materials that you definitely need for self-installation:

• drill;
• screws with a drill or a special attachment;
• Drills for metal, in case the screws without a drill;
• pencil and ruler.

In that case you could not find in stores all the necessary materials for the manufacture of mosquito nets, and bought ready-made designs, you can save a lot of your budget. You can easily cope with in order to establish their own. To do this, you must follow some instructions:

1. Drill the profile and tighten the screws, you do not forget to measure the necessary point of a pencil.
2. Before spinning screws, treat compound special sealant.
3. Pre-attach the mesh to the outside of the window, making sure of the correctness of his calculations.
4. At the top of the window profile, set attachment. This will help double sided tape.
5. After all the fasteners, remove the window itself mosquito netting were installed. Insert it into the prepared hole until it stops.

​​​​If all your calculations and the above steps were true, the lower part of the grid should vplone adjacent to the lower fixture. If the grid is not held firmly, try to slightly lower the upper bracket. So you get a secure fit in a mosquito net made with their own hands.