infrared film warm floor perfectly with laminate
The main feature of this system is that the heat sources are below the surface of the floor covering. They emit heat warms coating which transmits energy into the surrounding air. For each type of true any of the following statements:
- heat is evenly distributed;
- system is very effective;
- no heating elements in prominent places;
- Dust is not circulated around the room as in the case of radiator heating type.
Mat electric underfloor heating - compact and lightweight, but it is able to efficiently heat a spacious living room
Any of them can be mounted on a concrete base, or wooden floor. Warm floor under laminate of each of these types has its own advantages and disadvantages.
Water underfloor heating pipes, before laying topcoat poured concrete screed
Useful advice!To water floor functioned more effectively, it is necessary to create more than one loop, and even 6 or 8. This will allow more evenly distribute the heat. The tubes will be shorter, so the heat losses are reduced.
Underfloor heating: the pros and cons (video)
The device water floor heating on the wooden floor is safe
The heat source in this device is the heated water circulating through tubes that are positioned directly under the laminate. Modern industry produces tubular products for this purpose, made of advanced materials using innovative technologies. Because of this plastic and metal pipes provide complete safety of operation of the system. Any leakage of water are excluded.
Initial stage arrangement of floor heating water - laying pipes of crosslinked polyethylene insulating substrate
For laying water underfloor heating you need around the room put a damper tape. Then arrange on top of the rough base of hydro and thermal insulation, expanded reinforcing mesh. The pipes are then stacked in parallel or spiral manner. In the first case, the pattern looks like a snake, and the second on the spiral. The ends of the tube are closed on the heating circuit, so that water freely circulates inside.
Embodiments pipe-laying water underfloor
The next stage - it fills the entire construction of sand-cement mixture. The resulting aligned under the coupler laying laminate. During circulation of coolant through the pipes cement will warm uniformly transferring heat laminate.
This type of floor heating has several advantages:
- safe operation;
- reliable operation;
- You do not need electricity when the fluid circulation occurs naturally.
Combining various embodiments arrangement "pie" water underfloor space within a housing
He, too, is not without drawbacks:
- a complex installation;
- decreased ceiling height of the concrete screed;
- With a damaged pipe, it will be difficult to repair the system.
Such a system is absolutely safe, and for mounting on a wooden floor. Warm floor under laminate arranged in this way will last a long time.
Water warm floor with their hands (video)
Device type electric underfloor
System operation is based on the property of conductors heated by passing electric current through them. The heating element is a special self-regulating electric cable. He is able to automatically change the resistance in areas where fixed overheating. This is necessary in order to avoid burnout. The cable is released and the single core two-core.
In most cases, the electric floor heating mats are placed side by side and parallel to each other
Before installation, surface level and make fine sand and cement screed to 0.3 cm. thick. If necessary, arrange for its thermal insulation. Drying occurs after 3 days. Only after that can be attached mounting tape. Then you need to fix thermoregulator in a convenient location and lay cable according to the instructions on the package.
On completion of the laying again made screed from 3 to 10 cm. thick. Completely dry it will reach only a month. Only then can we lay the flooring. To do this, a very good fit, produced in Germany waterproof laminate 33 class 12 mm thick.
Phases of the electric floor heating arrangement
Manufactured in Germany, waterproof laminate 33 class 12 mm is perfectly combined with the electric type underfloor heating.
Useful advice!For the device floor heating at home is best to buy two-wire cable. It is much easier to style.
Feature of the use of electric type floor heating is to select the optimum mode, whereby sufficient heat is provided by the optimal use of electricity.
Electric underfloor heating with their own hands (video)
Infrared film warm floor
This is the most innovative system of floor heating. It is a film which is a result of the impact of electric current is able to radiate infrared electromagnetic waves. This range of the spectrum is invisible to the human eye, but there is skin like heat. Half of solar energy - is infrared rays. The lack of an incandescent elements - the main feature of this material.
Infrared film warm floor - a modern and efficient heating system in a house
The installation of such a system is the most convenient. Suffice it to lay on the equalized base heat reflecting coating, and it has an infra-red film. Topcoat, which can be produced in Germany waterproof laminate 33 Class 12 mm thick, is laid directly on the film itself. There is no need to arrange screedThat is a long and laborious process.
Useful advice!Under laminate better to put a substrate is not made of polyethylene foam, as is often done in normal circumstances, and tupleks or izoplat. These materials have waterproof properties.
Laying of laminate on infrared film warm floor
Features of operation of such a floor is extreme caution. He is afraid of rough mechanical impact. Therefore, it is not necessary to put on such a surface heavy furniture. This may damage the tape and bring it down. It is better to use such a system in open spaces.
Each owner chooses the type of floor heating device at home. The decision is made depending on the preferences and the availability of financial opportunities.
