Gas infrared heaters of the cylinder: characteristics

There are some devices that do not require any fixed heating system or heating medium for their work. Their use is comfortable in all conditions, even in the absence of any communication. Gas infrared heaters operate from the cylinder due propane stock. And although the space heating method can not be called the safest, it is quite popular with a wide range of users. We try to understand why.

The advantages of infrared gas heaters: consumer reviews

According to customer feedback, the first and most important advantage of heating Infrared gas heaters - no connectivity requirements for some networks. In fact, this heater can be installed anywhere.

All that is needed for a full-fledged operation of the device - balloon filled with liquefied gas. If you believe the reviews, the infrared gas heaters for questioning may well work in the case of connecting them to the central gas supply system.

Manufacturers claim that use such equipment can be anywhere: in a multi-storey apartment house, in a private house, in the garage, in the greenhouse, etc. The device sufficiently mobile and easily when necessary transportation. In addition, there are several types of heaters, allowing to choose the most suitable option.

All gas heaters can be of two types:

• those that heat the surrounding objects;
• those that give off heat to the air.

If we talk about infrared heaters, they are working on the following principle: heat-exposed subjects, which in turn give off heat to the air. This method is considered the most effective, but it has a major drawback: the items that do not fit in the measurable area, stay cool. Near this heater pleasant to sit, for example, while reading the book, however, sufficient power required to heat the entire room.

Gas infrared heaters of the cylinder: the working principle

Using infrared heaters has some peculiarities. For example, the device can cover a large area, it must be placed as high as possible above the floor. In this case, the range of its impact will be as broad as possible, and the room is warm enough.

Gas infrared heater consists of the following elements:

• a body made of metal;
• a heat exchanger;
• divider;
• automatic control unit;
• reducer.

As for the size of heaters, they can be very different: from small compact models to the overall device, intended for large rooms, warehouses, garages and so on.

Note! Keep in mind that a certain distance should be maintained between the heater and the gas cylinders. Otherwise there is a risk of explosion, triggered by a flame inside the device.

If we talk about the principle of operation of the device, we can distinguish the following processes:

• delivery of gas from the cylinder to the gearbox where the gas pressure is reduced, whereupon it enters the heater nozzle;
• mixing the gas with the air and their combined penetration into the ceramic panel;
• uniform combustion gas and as a result, the total absence of combustion by-products;
• heating the ceramic component of the heater and further transfer heat through infrared radiation.

Due to the fact that the device heats the surrounding objects, total air temperature also increases. Because perfectly suited infrared gas heaters for the cottages, garages or greenhouses.

How to choose a gas infrared ceramic heater

Before you buy infrared gas heaters for the cottage or at home, you should be familiar with a number of characteristics that define the purpose of the device. Depending on the power, as well as design features, each option is most suitable for the specific operating conditions.

The main landmark in the selection of gas infrared heaters - it is their safety, so there should exercise the utmost caution and care. A mandatory requirement for the acquired model - built-in automatic shut-off system that is triggered when a rollover or a strong inclination of the product. Today, this security measure is considered mandatory.

Note!Another useful feature - automatic shut-off the gas supply in case the burner is accidentally extinguished.

In choosing a major role and where it is planned to place the heater. So, for premises necessary to have a sensor that will indicate the level of carbon dioxide in the room. After the combustion process produces carbon dioxide that may accumulate. In large quantities it is not safe for health and for life.

In the presence of a special sensor, indoor carbon dioxide level is controlled as follows: the instrument regularly takes a sample by determining the current level. Thus it compares it with a predetermined boundary. If the actual level reached the limit, the device is automatically switched off.

How to choose an infrared heater to testify

To buy gas infrared ceramic heater, it is necessary to focus on the mode in which you plan to use it. Perhaps you will include it periodically, when coming to the country for a few days. If you plan long-term operation, while an important role to play efficiency of the device because of its prolonged use will entail certain costs.

Choosing an infrared heater to testify, be sure to pay attention to the capacity of the device. There is a simple rule to be reckoned with: the more powerful device, the less mobile. And, accordingly, on the contrary. Simple and lightweight unit will never be able to give the same power as the massive bulky heater.

The choice in this case does not affect the total area of ​​the premises. After all, such devices do not heat the whole room, so its size is irrelevant. Think carefully about where you install the heater, and what area it will need to be heated.

Useful advice!Always better to buy a heater with a power reserve, and not to use it at maximum capacity. So you can, if necessary, to heat a large-sized area.

It will play a big role and appearance, because everyone will want to naturally fit the heater in the situation and not create visual discomfort.
Despite all its advantages, infrared heater still can not be considered a full-fledged heater, when it comes to permanent residence in the house. Its use is entirely justified as an alternative for short time intervals, or as an additional heat source.

How to choose an infrared gas heater for the garage

Buy gas heater for the garage - one of the most difficult tasks. After initially this room is filled with a lot of combustible materials which, in combination with such equipment pose a threat of fire. Therefore, the gas safety equipment is to satisfy more stringent requirements.

Component type most suitable for portable garage considered model because it is possible to change the direction of heat flow when necessary. The optimal indoor this type would be to use an infrared heater overhead gas.

Useful advice! Think in advance about how it will be carried out maintenance and repair of gas infrared heater. All its elements must be free approach.

Infrared gas heaters on gas balloon: the prices of popular models

Thanks to fairly widespread popularity, buy gas infrared heater from the tank will not be difficult.

The prices of some popular models of heaters:

Title	Power, W	Heating area, m²	Size, mm	Weight, kg	Average price, RR.
Floor gas infrared heater Ballu Bigh 4	4500	60 or more	270 (length)	2,8	2800
Gas infrared heater Ballu Bigh 3	3000-4500	45	338x278x372	2,3	2400
Gas infrared heater Ranger Fireplace with cooking	1500	15	275h275h180	1,8	3000
Azov infrared heater NeoClima UK-02	2500	25	192h150h86	1	1300
Street gas infrared heater 34 Master CR	3400	160x350x460	2,6	2200

If used as a guide ratings, gas infrared heater Ballu Bigh 55 is also a very good option. It has a high capacity of 4200 W, and also provides the ability to install directly into the cylinder of the device itself. Of course, this is reflected in its size.

Useful advice! If you want to buy infrared gas heaters for the greenhouse, it is necessary to select among street patterns. Room heaters with this task can not cope.

How to make a gas heater for the garage with his hands

The price for the garage gas heater is not always acceptable, and in some cases have to rely only on their own strength. Independent heater design long-tested and easy to understand instructions written for craftsmen.

Here are a few simple rules you need to consider before you get started:

1. The main demand of both the factory and a home-made gas appliances - Safety. Take this as much attention as possible.
2. Elements that are responsible for the supply and shut off the gas, it is better to buy ready-made (factory), so they determine the safety of the whole structure.
3. The easier it is to work the mechanism of the device, the better.
4. Pay attention to the economy, or the use of such a device can cost you dearly.
5. Use low-cost but high-quality building blocks, which will serve as a reliable basis.

To their own hands to make a quality heater, you will need the following details: leaf metal shears, rivets and klopochnik to install them, fine metal mesh sieve and cylinder gas. Moreover, not do without a special torch, equipped with a valve.

The first step is to attach the heater burner. For this mesh, attached to the metal sheet, encircle marker. After that, parallel and perpendicular to each other needed to finish the rectangular tabs. In this case one of them must be 2 times longer than the others. Then, using metal shears to cut the resulting image is necessary.

Thereafter, the elements necessary to fasten to each other: the burner is attached with screws to the metallic circle that had been cut. Ears are wrapped in opposite directions, and they mounted a strainer, which will serve as a lens. This is a ready-made home-made heater element.

Further it is possible to move to the fastening metal mesh. For this purpose it is necessary once again to draw on the sheet metal circle with the ears and then cut it. Further it is necessary to fix the net, which is attached to the lugs of each circle, forming a mesh cylinder.

Useful advice! The most convenient way to perform fastening using rivets and klepochnika. In this case, you should start with fixing the bottom and then move up.

When all items are ready, they can be joined to each other and the finished product is connected to a power source.

If the self-production of the device you can not afford, the important thing is what you should be guided in choosing infrared gas heaters from the cylinder - customer reviews, as well as specified by the manufacturer specifications characteristics. Be sure to take into account exactly where you plan to use it and for what purpose. If you are given the choice of a suitable model enough time, then surely your product will fulfill all expectations.