Fence on screw piles with your own hands. Step-by-step instruction

Preparing materials for the installation of the fence on screw piles will require a number of materials. They must be of high quality, as the durability and reliability of the structure depend on this. Selecting the supports should take into account a number of parameters, among which the weight and size of the profiled sheets, the likely wind load and some others. They will need:

• intaking screw piles combined type with walls about three and a half millimeters( the blades have a smaller size);
• guides for fixing corrugated board;
• poles for the gate;
• profiled sheeting 0,5 mm thick.

After purchasing all the materials, you should prepare for the process. First of all find the helper. Since you can not install a pile alone. One person should hold the support, and the second - twist it.

fence on screw piles -

drawings fence on screw piles -

drawings Mounting fence on screw piles

begin construction fence on screw piles markup portion. After the places of installation of supports are scheduled, proceed directly to the installation.

pile installation is performed by the nozzle , equipped with two handles. They are used to rotate the pile.

To install a fence on screw piles, a distance between them is planned at two and a half meters. Reclining the support by one and a half meters. When they are installed, follow the step-by-step instructions for mounting the fence on the screw piles.

1. On the surface of the posts, there are places where the guides will be welded. From the surface of the ground to the bottom guide should be at least thirty centimeters.
2. Three solid guides are welded to the piles.
3. The entire surface of the resulting metal frame is painted primer .It will protect against corrosion.
4. Further construction of the fence on screw piles includes fastening of the corrugated board .It is screwed onto the guides using roofing screws .The distance between the mounts is between ten and fifteen centimeters, depending on the size of the "wave".Combine sheets of corrugated board with an overlap not less than one wave.

fence on screw piles with their own hands step by step instruction. Photo

After the above actions, the fence on the screw piles will be ready. It will also be necessary to install a gate or wicket, depending on the specific needs. For the installation of the wicket from the corrugated board, the frame is first welded, then the corrugated board is attached to it. The resulting design is mounted on the support.

Such a fence on screw piles is simple in arrangement, relatively inexpensive, but quite reliable.

Features of installing screw piles

To ensure that the fence on screw piles was of high quality and durable, it is very important to pay attention to small parts. They only seem unimportant, but in fact they play an essential role.

Firstly, the site for placing the piles is exactly to mark .Supports located at different distances will not make the fence stronger.

Secondly, the guides should weld as accurately as possible. They are located at the top, in the middle and below. This arrangement will give the carcass strength.

Third, the distance between the guides should be approximately equal. The lower one should not be too close to the ground, so that the corrugated board does not touch the ground. With close contact, it collapses faster.

Another important detail of the fence is the installation of gate .When installing fencing of profiled sheeting, a sliding gate can be a convenient option. The following processes are required to install them. Short piles are twisted next to the fence. There are only two of them. They are welded to channel , and to it, in turn, rollers. The door leaf will move along the rollers. Then a trapezoidal structure is installed. It will be fixed profiled sheet and get the canvas.

fence on screw piles with your own hands video

fence on screw piles with your own hands video

Screw piles for fence - reviews

Screw piles are actively used for the construction of fences, so you can always find people who can give feedback. I must say that opinions are divided. Some consider screw piles as a waste of money and offer more traditional and cheaper options of supports. But there are other people who just put a fence on such piles.

Almost all owners of fences, which use screw piles as supports, are satisfied with the design. They point to the longevity of the of such a fence, it is said that one can not remember about it, i.e.it perfectly serves without any additional maintenance.

The only negative, which can be mentioned in this case - price .The variant with screw piles can not be called budgetary. However, durability and reliability, coupled with the convenience of installation are worth it.

Exterior view of the fence

Above, the article describes a fence made of corrugated board, for which pylons in the form of screw piles were used. But corrugated board is not the only possible option. Consider the various solutions and make sure that the appearance of the fence can be any.

• Fence from wooden fence , which is attached to metal guides. Since the fence has less weight and sail, there is no need for a central guide. The design becomes easier and easier. The fence can be fixed in one layer or in two: outside and inside.

photo fence on screw piles

• Screw piles can serve as supports for the fence from metal rods .Such a lattice fence is transparent, does not obstruct the view, but it perfectly prevents penetration. Due to the reliability of the supports, the fence is distinguished by its durability and stability.

fence photo on screw piles

• metal mesh can be attached to screw piles and .Such a fence will be very easy. The grid is rigid in itself, so you can do without guides. The grid is fixed directly to the posts. This option greatly simplifies the installation process and makes it faster.

photo fence on screw piles

• As a material for the fence can be used not only wooden but also metal fence .It is very similar to the material of natural wood, but is more resistant to unfavorable factors and much more durable.

• Fence from boards on supports made of screw piles - one of the convenient and aesthetic options for a country house. Do not always want to use a solid fence. Flat boards look much more interesting and are better combined with a country house than a solid metal canvas.

photo fence on screw piles

• An interesting option is a fence made of corrugated board, which is designed for natural wood .If we consider it from the outside, then it is not easy to accurately name the material. For this design, screw piles as supports are best suited.