Finishing of the lining and its advantages over other materials
Natural materials have always been popular, this applies to both stone and wood. And the latter is most in demand because of the feeling of warmth and comfort that comes from him, not to mention the woody incomparable aroma. Even concrete or block buildings are transformed if they are sewn inside and outside the board.
Among saw-timbers, planed plows are more often used, and this is exactly the kind of grooved boards that are used to be the lining. It is a durable and durable material that, if properly finished, lasts for decades, especially after treatment with an antiseptic.
Unlike plaster or tile, the lining does not require much labor, although its installation is quite a painstaking task. No additional lining is required on the lining, all you need is screws, nails or staples for attaching the .In general, the board is an atmosphere of coziness and a healthy microclimate, the touch to warm wood is much more pleasant than to a cold stone.
The lining perfectly absorbs and gives out moisture, thereby regulating the level of moisture content in the room air. As for the price, natural granite or marble is much more expensive than lining, and even the cost of artificial stone is slightly higher. At the same time, the most budgetary version of the plank is the pine Euro-lining.
Sheathing of the lining: the material features of the
Many materials are suitable for both exterior and interior, but this does not apply to the lining. The thickness of this sheet is 12.5 millimeters, so the outer skin is impossible because the thin layer of wood from the dampness begins to warp, deform, and then as it dries or when there is a sharp drop in temperature near and to the cracks.
The length of the boards is also standard - 2,1, 2,4, 2,55, 2,7, and also 3,0 meters, however this does not mean that the entire board is typical, it is divided into 3 classes: A, B, andS. And although the formats of boards belonging to different classes are absolutely identical, their quality is significantly different. However, there are no universally accepted standards in Russia, each manufacturer sorts the lining according to its own understanding.
If you deduce the average level of sorting, the most common in the Russian sawnwood market, you should start with the Extra class Extra, the surface of the lining with such a marking should be ideal. Classes A and B may have small light knots and spots, and only at the C level are dropouts and darkening of wood possible.
The last class is the most attractive in terms of price, and many do not even bother even the errors in the appearance of the board. By the way, the lining of the walls of the lining of this quality can be quite aesthetic: the dropping knots are removed, and the holes are poured with mounting foam, which in color completely corresponds to the bright spots on the second-class vagon.
How the walls are trimmed with the lining
The purpose of interior decoration - a complete transformation of the room. And what is good is the decoration of the walls with the wall shelf - using different methods of installation, you can either visually expand the room, or create the illusion of a higher ceiling.
In the first case, the lining is fixed horizontally, and in the second case - vertically. And even if you want to perform the installation on wooden walls, before their upholstery make a crate: for horizontal plating - vertical bars, and for the vertical - parallel to the floor.
If the length of the board is not enough for the full row on the wall, it is better to build the next board with the connection "in the descent", the joint will be stronger.
There are three ways of fastening the lining to the lath: screws, kleymers( special staples) or nails. Yes, and the fastening elements can be driven into the grooved board in different ways, both in the lower shelf of the groove and in the base of the ridge. Staples are desirable to choose galvanized, the humidity in the premises is high and the probability of corrosion of metal is better to provide in advance.
Nails and screws must also be stainless. After the nails or staples are clogged( and the screws are twisted), make sure that they do not interfere with the comb / groove connection between the adjacent boards. The lining of the house with the lining can begin both from the floor and from the ceiling, the main thing is that the boards are perfectly aligned.
