Heater foamoplex is used for thermal insulation of various elements of buildings and structures, for example, for insulation of foundations, floors, roofing. It is also used to insulate the components of utilities( water pipes, sewers), in the construction of storage tanks and even wells. Plates of penoplex are of different brands, which determines their use.
The main properties of the foam:
- is not subject to combustion;
- increased elasticity on compression;
- low thermal conductivity;
- does not absorb moisture:
- is easy to install;
- ecological compatibility;
- long service life;
- light weight;
- does not rot, is not destroyed by rodents, bugs, etc.;
- good resistance to aggressive substances.
The "31C" penoplex is used for structures that are not subject to dynamic or static loading. Therefore, such plates are used for insulation of water pipes, heating networks, tanks, etc.
Plates "35" grade have increased resistance to combustion. They are often used for interior finishing of structures( foundation, walls, floor).Penoplex of this brand well minimizes heat losses and is an excellent heat insulator.
Penoplex "45" is capable of withstanding pressure up to 0.5 MPa. This is its property used in the construction of airfields. Apply it in road construction, and in laying rail ways. When erecting buildings and structures, it is used to insulate buried foundations, as well as floors that are subjected to heavy loads( for example, production areas).
Here are some characteristics of this material. However, it should be borne in mind that each specific brand of penoplex has its own characteristic. Therefore, only the general "range" for all brands will be indicated.
Technical data of the penoplex
- material density( kg / m3) from 28 to 45
- thermal conductivity coefficient( W /( m · ° K) 0, 030 at 250 C
- category of fire safety from G1 to G4
- vapor permeability coefficient 0,007 - 0,008mg / m · h · Pa)
- compressive strength at 10% linear deformation 0.2-0.5 MPa( kgf / cmІ; t / mІ)
- standard dimensions: width 600( mm)
- length 1200 - 2400 mm)
- Thickness 30 - 100( mm)
- 7) Temperature range of application -50. .. + 75( ° C)
When using this material,oizvoditelya on temperature range, the use of adhesives, as well as order placement during installation. See also the table for calculating the insulation thickness of Penoplex in different situations:
