Construction brushes - we disassemble the "colorful" variety
We use building brushes for painting or whitening of any surfaces. You can also use these tools to apply soil to any surface, impregnation of the surface with varnish. There is a certain classification of building paint devices.
Brush bodily , which is most often used for whitewashing. It is made from bast( raw linden). brush has a classic flat shape. It is flexible and is used for painting completely different surfaces, since it is quite universal. It is used most often to smooth out the traces of a hard brush.
Brush- Handle is a tool that is needed for priming or painting surfaces that have a small area. Brush brushes have a wide bristles and are used for painting or priming large surfaces.
Such tools can be additionally worn on a telescopic handle and paint ceilings without using a ladder. When working with a tool there is one inconvenience - the ink flows down on your hands. To avoid this, you can put a foam roller on the handle.
Fillet brushes and other narrow profile types
The flat brush can be used for completely different purposes: for painting or priming large or small areas. Everything depends on the length and width of the pile. Brush- makrovatsa in appearance can remind a small mop. Most often it is used to apply glue to wallpaper. Due to the fact that the brush absorbs a lot of paint, it is rarely used for painting.
Filigree brush is used to decorate small parts or to decorate joints of different color surfaces, because it has a narrow bristle. Also with this tool you can create decorating patterns by stencil and it's very convenient to decorate corners and plinths.
For the decoration of artistic roughnesses, you can use the brush .The tool is most often used by experienced painters. The brush for whitewashing is usually wide, similar to flutes, so that it would be more convenient to apply the material to the surface. At the same time, the bristles should be soft so that the whitewash rises more evenly.
Flybrush - features of the
Before using construction brushes, you need to know some features of their application. To work with flywheels it is necessary to dip them into the paint, squeeze out a little and begin finishing. During operation, the tool needs to be rotated periodically in the hand so that it can take the form of a torch. Do not press the brush strongly. With respect to the surface, it holds perpendicularly, or with a slight inclination.
You need to work with the brush first left-right, and then-up-down. With flutes and maklovitsami work about the same, but you do not need to turn the brush in this case. Flaxing is carried out with a dry brush, and every time it is impregnated with paint, it must be washed and dried.
For decoration of panels, a thin brush and ruler is used. It is necessary to draw a line accurately and accurately. Handles are used to work with oil paints, and you need to recruit a mixture in a small amount. Apply the paint evenly broad strokes.
Do not press strongly on the brush, because there will be a divorce. The pile should only bend slightly under pressure. After the end of the brush can be washed and dried. For this purpose, water or a solvent is used. Then the same tools can be used again.
