Some basic recommendations how to properly work with the Bulgarian
It's unlikely that you will pick up an unfamiliar tool without having read the instructions beforehand, so we will not advise you first of all. But to reread again how correctly to work with the Bulgarian, video training on this subject to look - will not be superfluous, suddenly something was missed, something was not paid attention. But, however, further there will be plenty of useful tips, the main one among them: do not start serious work, taking the tool in your hands for the first time.
First, practice a day or two on scraps of pipes or sheet steel, as well as on several concrete blocks. It is very important to buy equipment at the same time as buying a tool, at least protective glasses, but it is better to immediately shield, in case of anything, to protect the entire face. Since you are going to work with an electric tool, remember that the use of a bulgark in a humid environment, and even more so in the open air during rain or other precipitation, is unacceptable to the .
Also it is impossible to work near to those places where combustible substances are stored or gas pipes pass( the slightest leak can turn to an enchanting fiery spectacle).Do not lift the working bolgarku by the wire, and the instrument that is turned off in this way is undesirable. About how correctly the work is done by the Bulgarian, the video exists a lot, but the theory is no less important.
How to use a Bulgarian at home
Many people, having acquired a corner grinder, a rather complicated tool in circulation, have absolutely no idea how to properly use the Bulgarian, how to stand up, to ensure safety for themselves and others. Therefore, while the unit is not running, make sure that you have purchased the wheels for the machine, rather than those designed for a lower speed.
In other words, the diameter of the nozzle must correspond to the power of the grinder, the larger the disc, the smaller the speed of its rotation. Do not buy cutters, even if the seller claims that they are special for the angle grinder. Everyone knows what is needed for a Bulgarian - grinding and cutting of metal( concrete, stone) with an abrasive, milling into the list of tool options is not included.
When you are going to work as a Bulgarian, install the casing strictly between each other and the disc, this will give you additional protection from the fragments if the nozzle breaks.
And, by the way, about the speed of rotation. At the Bulgarian, it is extremely high, which means it is worth remembering the elementary rules of working with the Bulgarian, that is, getting up so that no movement will take you out of balance, and not be in the plane of rotation of the disk. It is very important to carefully fasten or press the small objects to be processed, so that the force of the nozzle rotation will not be thrown at you or someone nearby.
The rules for using the Bulgarian, specified in the instruction, state that children and pets should not be allowed to work. Indeed, to expose someone to extra risk is not worth it, because when the disk flies, the fragments fly along completely unpredictable trajectories, sometimes going beyond the plane of rotation. You will be protected by a tool cover and protective equipment, and others may suffer.
How to cut a Bulgarian properly, the rules of using the
tool In order to cut a copper pipe or steel sheet, it is better to use a metal disk saw, but not all can afford to hold several electromechanical tools at home. An abrasive wheel can also cut metal, but you need to know a number of rules so that the nozzle does not break. For example, for work of small scales fit discs 115-125 millimeters, and the metal is better to saw with a nozzle 1 mm thick, it will cope even with a 20 millimeters steel sheet.
How to properly saw a Bulgarian, you will be told by any master, the mode is the following: 5-7 minutes of work, and for 30 minutes the instrument is given rest. For a different type of tile, natural stone and concrete blocks( as well as slabs and other products), use a diamond disc .Such nozzles are not expensive, so you need to know how to properly cut a Bulgarian stone. Mainly, to ensure the longevity of the longevity, cut the place regularly with water.
You need to hold the tool very tightly, but at the same time, the brush should not be tense, otherwise you will not feel if the disc's skewing in the saw cuts suddenly. And, finally, another very important advice how to properly keep the Bulgarian. In no case do not hold a tool with two handles for only one of them, the grip should be exactly what the angle grinder is designed for. Foolhardy with the instrument is inappropriate as well as driving.