Veranda repair

The veranda at the dacha is one of the most beloved rooms. Cozy, bright, she always disposes to a family tea, rest after garden work, solitude with a favorite book. However, like any structure, with time it needs to be repaired. Let's figure out which element of this structure should start repairing the veranda with their own hands.

Tools for verandah repair

1. Jack.
2. Nailer.
3. Hammer.
4. Screwdriver.
5. Saw a tree.
6. Electric drill.
7. Brush or roller for painting.

Repair of the basement of the veranda

This process is the replacement of old cracked reinforced concrete blocks. Such blocks are easily manufactured in the presence of sand and cement and a previously prepared block mold. Composition of solution : 1 part of cement to 3 parts of sand. For better strength, the wire inside the frame is made of wire. The production of cement blocks is made about a month before the foundation repair. Before installation, you need a place where the block will be laid, covered with gravel or slag for stability.

Once the finished unit has dried, it can be installed on the prepared places under the house. It is recommended to treat blocks with bitumen, for greater strength. A jack is necessary for leveling the veranda frame.

Scaffold veranda

This type of veranda repair is to eliminate rotten and prepare new beams. We decontaminate the rotten wooden block with the help of a jack, in its place we lay a new block specially processed with anti-rot agents.

The roof of the veranda

The next stage of the repair is to install the roof over the veranda .The best material for the roof of the veranda is metal. Before laying such a material, it is required to cover the roof with wooden sheathing as in the photo, then we fix the roofing material with racks, fixing the entire length of the covering of the area. After the roof has been prepared, lay the metal tile on the base and fix it with screws.

Paul on the veranda with his own hands

The floor in its qualities is in no way inferior to wooden beams, except that it is more susceptible to moisture. For this, the wooden floor base is inspected for rotten or cracked boards, if they are, they are replaced with new ones, cleaned of dirt, treated with sandpaper, then the agent is applied against decay. After installation, the floor is painted. For better appeal, the floor on the veranda is covered with linoleum.

Window repair

Windows are the most exposed to atmospheric precipitation. Therefore, if the windows are in good condition, then they should only be cleaned from the paint that has become unusable, treated with an antiseptic and again apply enamel paint. If the elements of the windows are rotten, it is better to replace the entire window with new ones by ordering the necessary ones in the specialized company. Install such units will not be a huge task: you will need an electric drill, a wood drill and self-tapping screws.

Walls of the veranda

Walls are more resistant to precipitation, they are not threatened by temperature changes. The need for their repair is usually caused by the fact that over time the paint begins to peel off. Using a special sandpaper, remove the paint layer, ground with antiseptic and re-varnish or paint.

Door repair on the veranda

This stage consists in checking door locks, hinges. Over time, locks from atmospheric conditions are covered with rust, if there is a need to replace a newer lock, then it must be replaced. When inspecting the door hinges, it is important to check for loosening, if necessary - tighten with a screwdriver. After preparation, the doors are painted or covered with dermantin.

Veranda repairs must be done on a dry summer day. As can be seen from this article, the process of work is able even for a beginner.

Video repair verandas

We suggest that you familiarize yourself with the video repair veranda with your own hands .