The choice of a heater for a summer residence is not an easy question. First, all suburban buildings differ in size and architecture. Someone is content with a small "shed", and someone has a full-fledged house in 2-3 floors. Secondly, some live on the site all year round, others - are arrivals, and then, only in the summer season.
And for what the gas heater for a summer residence is specifically purchased? It seems to be a ridiculous question, but does everyone know that with the help of such devices it is possible to heat not only the premises? There are models that are called "street".They are designed to heat objects located outside the house in the territory. Their use allows you to solve a lot of problems that most of the summer residents are facing. That's about such technical devices and will be discussed.
Spending your money on the next acquisition, we want to get from him exactly what we need. In order for the choice to be optimal, it is necessary to have at least a general concept of the assortment of the corresponding products. And purposefully search, order - now you can find almost everything. And if you buy only what is exhibited in the store and recommends the seller, it is unlikely that we will be completely satisfied.
Those who want to learn more about the options for heating the house with infrared heaters, we recommend reading this article.
"Street" heaters
Such models operate on two types of fuel - electricity and gas. We are interested in the latter option.
What can be heated( examples):
-
Teplice( unheated). - beds, if the nights are cold, and the harvest is still "not ripe."
- Saplings of heat-loving trees, if suddenly( which becomes the norm even in April-May), frosts.
- Arbor, patio or veranda in inclement weather.
- Those who hold poultry, street gas heaters will help solve the problem of brood savings if suddenly the hen refused to breed eggs. And the young, too, needs warmth.
The options are more than enough, and the diligent host himself will figure out how to use such a heater. There may be a question - what's the point of "shooting" gas if you have to heat the atmosphere? The answer is simple - it spends no more than 8-10% of energy, and the rest( at least 90%) is spent on heating a particular facility.
The fact is that these are IR devices( we wrote about them in detail).When the gas is burned, thermal rays( an infrared spectrum) are formed that increase the temperature of those objects to which the irradiator is directed. And at the same time, the humidity level( microclimate) does not change at all, as the heater does not dry the air. Consider all the criteria for choosing a reliable gas heater for our cottage.
Type of gas
If it is butane, then such a heater is advisable to use when it's just cool. But here at frosts on such fuel the device is inefficient. In such conditions, "propane" models are used.
Conclusion: you need to choose a heater that works equally well on both, and on another gas.
Weight and dimensions
Almost all "street" devices are mobile. But they have a different design. In this regard, one should be guided by the convenience of placing where the device will be used.
Some heaters are equipped with wheels, which makes them more convenient to use.
Material
If the gas heater is placed on the street, then the housing must be either of "stainless steel", or metal, but with a mandatory anti-corrosion coating.
Operating time without refueling
"Start" is made according to the principle of piezo ignition. The button is pressed, and the device begins to heat the space in the "responsibility" zone. How long can he work continuously?
Power
It determines the radius of the heating zone. It is necessary to be guided by the following ratio: 1 m - 2 kW.But here there is a nuance. With the increase in power( more than 10 kW), the radius increases not in direct proportion, but in "fractional".Simply put, gas will have to be burned more, and the result will be minimal.
In some models, it can be configured to either a low or a high flow limit, which is not entirely acceptable and rational in terms of economy and convenience.
Automation System
What is provided? There must be at least 2 protection( gas cut-off):
- when the flame disappears.
- after tilting the device;
Repairability
This is more relevant to the design of the reflector. If it is "prefabricated", then it is not difficult to replace 1 section. And if "whole", then you have to buy a new one.
Well, such parameters as shape, design - here tips are not required. Each of us has our own priorities.
Price
The price spread corresponds to the richness of the assortment. Therefore, you can specify only the approximate cost of gas heating appliances, as it depends on the manufacturer, engineering solution, dimensions, power and many other parameters.
It should be understood that the term "street" should not be interpreted literally. Such devices are also excellent for raising the temperature in small buildings( garage, summer kitchen), including in cottages. In the early spring or autumn, they also need heating.
