Why choose a fence made of polycarbonate?
This material is distinguished by such properties as its cheapness and functionality. Polycarbonate is a polymeric material that is translucent or completely transparent, which is used in finishing and construction.
We list its main advantages:
- strength and lightness, in this regard, the material does not contribute to weighting the structure, so it serves a long time;
- easy installation, easy to handle - the material can be cut with a hacksaw or electric jig saw;
- providing noise insulation in mind with reflection of sound waves;
- huge selection of shades fences of polycarbonate, as well as their components.
In addition, polycarbonate seeps into the sunlight, as well as it does not pass ultraviolet rays, which favorably affects plants growing behind such a fence.
Cons for using polycarbonate
Of course, like any other material, polycarbonate has its negative side. It is expressed in the lightness of the material, therefore on all sides of the fence it is necessary to create metal fastenings, so that the fence is not blown away by the wind to neighbors.
The material has a low degree of impact resistance, therefore it is not allowed to throw stones and other objects in it, which can disrupt the aesthetic appeal of the summer enclosure. Therefore, fencing of polycarbonate is recommended to mount in places where there are not many people.
Another disadvantage of polycarbonate, used as a material for installation of the fence is its high price. The cost of the material is much higher than fences made of bricks, wood or corrugated board.
Installation of a summer cage from polycarbonate
For installation of a fence it is possible to invite the expert as the assistant, and it is possible and to consult on own strength to be proud of itself eventually. To perform the installation of fencing from this material, you need to act step-by-step.
First you need to pull the rope between the beginning and the end of the future fence. For this, a layer of soil is removed and the area is leveled. A marking of the space with the designation of places for the location of the pillars as well as the turning corners is made. Often, the distance of the poles is equal to 3 meters, this serves not only the goals of strength, but also aesthetic goals. The bottom of cavities in the ground, made for support, should be covered with rubble or sand and set up poles.
The next step is to weld the horizontal frame guides to the installed supports. Metal elements are to be cleaned, primed and painted to protect against corrosion. As you can see, the installation of the polycarbonate fence is not so complicated, so do not be afraid of difficulties and, finally, decided to take up the matter.