Plastic windows have a serious margin of safety and durability.
However, during the operation of PVC windows, there are some problems that lead to the penetration of outdoor air into the room with the windows closed.
If the plastic window is blown, it is better not to try to repair it yourself.
This can break the window, which is a rather complicated structure.
Windows consist of several systems and nodes, the availability and condition of which affects the functionality of the windows.
The blowing of plastic windows can be caused by various reasons.
Clamping mechanisms can be relaxed, curing and loss of sealing of the window seals occurred, a breach of the sealing of the joints and gaps that formed during the installation of plastic windows.
The simplest solution is to glue PVC windows from inside with an adhesive tape and postpone the visit of the master until the warm season.
But the best solution will be the call of the master, the exact diagnosis and troubleshooting, as well as additional insulation of the windows. The decision will have to be made independently.
Video:
Plastic windows are manufactured using the latest technologies, and if they blow them out, the reason can be either in insufficiently qualified installation, or in accelerated wear of any assembly or component.
Therefore, you need to periodically inspect the windows and check their functionality, and if necessary, call the master at home.
By the way, for competent ventilation indoors, it is highly recommended to purchase - a supply air valve, created specifically for plastic windows.
Usually, the work of the wizard is to inspect the windows and check their functionality, while determining the elements responsible for blowing the plastic window.
Then adjust and lubricate the fittings, change the damaged or missing seals, an additional sealing circuit is installed to enhance the effect of warming.
It is mandatory to check the quality of sealing joints and their tightness. Re-seal if necessary.
After carrying out this set of works, it can be ascertained the elimination of the blowing of the plastic window.
It is highly recommended to move the windows to the winter position before the onset of winter cold. This is done by a simple adjustment of the fittings.
Basically, the eccentrics are rotated around the perimeter of the window 180 degrees.
Once again we remind you that windows repair should not be done independently.
