Characteristics of acrylic putty
The processing of puttying wood and elements made of this natural material takes a little time, but this procedure is able to protect the material from damage, drying, cracking. The composition is applied easily, dries quickly, which allows you to respond quickly to the shortcomings found and not to stop the entire repair process.
Hard and moisture resistant, putty can be painted in any shade, you will choose the perfect color in tone to the main material. It is firmly fixed on a wooden surface, it is possible to apply water-dispersion varnishes and paints over its layer. However, even the most high-quality and expensive acrylic putty has not only its advantages, but also its disadvantages.
The minuses are not significant and manifest themselves in special situations, but it should be said about them. If you have to remove excess putty, then stock up on sandpaper, it will very quickly become unusable, clogged. In addition, "sanding" the already applied and dried layer is harmful to health, dust is formed, which irritates the mucous membrane. And, of course, the putty is not magic and huge crevices without flaws can not be sealed, it will crack after the tree, and a second layer will be required.
Use the formulations indoors or outdoors. Putty, as a rule, is produced in two versions: not tinted beforehand( it is then given the right tone with the help of compositions) and pre-tinted, which can be used immediately. Compositions are easily applied to a wooden surface, quickly eliminate all irregularities and fill the grooves.
Correctly selected acrylic putty on wood allows to carry out repair and restoration works almost instantly, correctly prepare the surface for application of varnish or an additional layer of paint. If it is important for a person to preserve the original appearance of a product or wood material, it is such a putty that will help to repair defects without damage.
Advance collection of
tools New wooden doors and windows must be treated with special materials before installation, in order to quickly eliminate all irregularities and correct faults, as well as protect the material from destruction. Not scratched parts of the surface, protruding knots and wood particles look sloppy.
Get rid of the shortcomings can be easily and quickly, water-dispersion acrylic putty will help in this, like nothing else. The putty stuck putty can be not too equal, to make a surface such will help a skin with small grains. Large sandpaper is useful for final finishing of the wooden surface. Work with nazhdachkoy necessary only if the tree is not additionally covered with varnish or a layer of paint.
Feature of the composition is that the frozen filler does not absorb the stain like a tree. After carrying out the work, the coated part will be marked out prominently, this should be taken into account if the plans do not cover the surface of the wood with paint.
How to apply the putty correctly?
Before starting work with putty, using the skin you need to process all the visible defects, wooden hangnails. After the procedure, dust and debris should be removed from the surface with a special brush. Some manufacturers of fillers recommend first applying a primer to the wood for better grip.
Accurate movements fill all the voids and recesses in the material, since the filler is not superimposed on a thick layer, it is necessary to work carefully. Even the best quality acrylic putty on wood will not be able to remove large holes. If a tree crumbles, it is easier to replace its part or the whole canvas.
Using a spatula will control the amount of putty, quickly remove excess. After freezing, excess material is removed with sandpaper. However, try to avoid the machining of the putty layer, it is better to impose it exactly and enough, without excess, but it will come with experience.