Interior finish of wooden house

Interior finishing of a wooden house with plasterboard

In a wooden house under the GKL you can give the ceilings and walls of those premises where you plan to wallpaper or install tile, as well as window and door slopes.

Obvious advantages of using drywall

1. Easy to use, easy to cut with the usual mounting knife
2. It achieves ideal evenness of the surfaces of walls and ceilings
3. Design possibilities in the form of multi-level ceilings or falshakers
4. You can place insulation( roll or plate) behind the sheets of GKL

Main minusdrywall - use only in dry rooms( even if the GCR comes with the marking "moisture-proof").

Drywall is not a finish material, therefore it requires further finishing. But let's not run ahead, everything in order. The main algorithm for installing gypsum board on both the ceiling and the wall is the same. The difference is only in the load. Suspensions for the skeleton of the ceiling are located more often and experience a double load.

So:

1. Frame from the profile( bar) is exposed( hung out) with metal punched tape( suspension straight) strictly in level with exact observance of linear dimensions: the profile( bar) step is 0.6m, the suspension step is 1m( walls), 0.8m( ceiling).Joints of sheets must necessarily fall on the profile( bar).
2. Joints GKL are covered with a primer and sealed with reinforcing tape( serpyanka), then joints are sealed with putty for 2 times.
3. Grind and re-primed. The surface is ready for painting or sticking any kind of wallpaper.

The interior finish of a wooden house with plasterboard will be good in a dining room or kitchen, a living room with a fireplace, where in the interior the walls decorated with textile wallpaper or silkscreen look very impressive.

In the children's room one wall, finished with GKL, cover with wallpaper for painting and give it to the child for personal creativity.

Interior finish of wooden house with lining

Many believe that the lining is used solely for the device of floors and inner skin of the bath. In the meantime, the decorators see the design of the interior decoration of the wooden house in the "Russian" style, using natural materials from wood of various breeds. The lining is characterized by the correct geometry, easy installation and, of course, aesthetic appeal.

How to mount the lining, step by step instruction

1. Before installing the lining, treat it with antiseptic and dry it ensures protection from insects and mold.
2. Decide on the performance. Vertical arrangement of the lining visually increases the height of the room, horizontal - width. You can combine directions, for example, a third of the wall from below - horizontally, further to the ceiling - vertically. Diagonal installation is fraught with large waste material, but it looks original.
3. If your wooden wall is originally flat, fasten the lining directly to it, if not, then you need a skeleton.
4. Horizontal mounting of the lining should be done with a spike downwards, otherwise dust and dirt will accumulate in the grooves.
5. The lining is fastened to a wooden wall or a bar with nails from the side of the groove so that the bonnet can not be seen.

Lining the attic and verandas. The walls of the lining are combined with smooth walls, emphasizing such a popular mix of styles now. In the bedroom, lined with lining, just magically breathing and sleeping.

Interior finishing of a wooden house with the block house

Blockhouse is a kind of lining. The installation technique is exactly the same. It differs in size and appearance. Precisely imitates round logs. The blockhouse is very popular with exterior decoration in private construction, but the interior decoration of a country wooden house in a unique color of the blockhouse decor will not leave indifferent neither the inhabitants nor the guests of your house.