How to sew a house with metal siding by yourself?

The main parameters of metal scoring

Metallosiding is a very light steel galvanized panel covered with polymer film. In appearance they resemble a wooden paneling. Most often, this type of material is used as exterior decoration of buildings, but sometimes it is used inside.

It is very convenient when installing walls of even the most complex structures. Metal-finishing does not require special efforts either during loading or during transportation, because the panels are very light, and are relatively cheap.

The width of the panel, as a rule, is 20 cm, the length can vary from 20 to 60 cm. It can be smooth and rough in texture, the color scale is very wide. In addition, there are a number of advantages over vinyl siding, for example, strength, durability, heat resistance, high fire safety.

Preparing for metal siding

The siding of a house with metal siding can be done by any owner who wants to improve the appearance of his house. Pros in this work will be much more than you even imagine:

• easy to install;
• cost savings;
• slow work;
• satisfaction with the achieved result.

If you decide to tackle such a thing as finishing with metal siding, you should do some preparatory work. You will need to find the material for the shed, which will be attached to the siding, and tools: portable electric saw, cross saw, hammer, metal hacksaw and a large number of screws suitable for the size of the selected material.

The sheathing of the house with metal siding will require, first of all, a device for the lathing, which will cover all irregularities of the old facade. The process of installation begins with the installation of a special grate, mounted on the facade of the house exactly according to the level. After complete installation of the lath, the panels themselves begin to prepare themselves.

We perform the metal siding correctly

The metal siding should begin with the first, bottom row, strictly align everything horizontally. After screwing the first panels with the screws, start the installation of the next one, and then proceed in order. There are several subtleties that a beginner should know: The

1. self-tapping screw must be installed in the very center of the mounting hole;
2. it is impossible to twist the screw to the end, you need to leave a gap of 1-1.5 millimeters, so that when the temperature fluctuates, the siding panel is not deformed.

At present, the type of decoration is very popular, which is difficult to distinguish from a log. It accurately simulates the texture of the tree and the shape of the log. The technical characteristics of this type are the same as for other types of metal siding. But it differs by fastenings, because the fastening system has two parts - a lock and a grip.

Finishing the house with a metal siding under the beam requires some additional elements for the finished look. These include cornices, corners, ebbs, window sills.

If you have decided what type of metal siding you will use, then you can start to work, clearly following the stages of installation:

1. We prepare the facade of the house for the device of the dredging;
2. Make the markup of the surface;
3. Mount brackets;
4. Install the thermal insulation;
5. Mounting profiles for finishing;
6. Install additional elements;
7. Final work on the docking of the final panel with the roof.

Question, how to sew a house with metal siding, you are successfully solved, you can be proud of your work.