Technical characteristics of the
DSP In Russia, the size range of this material is represented by the following parameters:
The width of the produced boards is 1250 mm( the variant is old, but does not lose its relevance) or 1200 mm( today's standard).It should be noted that they produce slabs, referring to both standards. Consider the parameters of plates of the old sample.
Dimensions DSP width 1250 mm
Issue two lengths of plates:
- With a length of 2700 mm. If we take a thickness equal to 8 mm, we get the weight of the plate - 36 kg, 10 mm assumes a weight of 46 kg, 24 mm - 112 kg. As we see, the more the DSP thickness is taken, the greater its weight index.
- With a length of 3200 mm. According to the standards, a thickness of 8 mm assumes that the weight will be 43 kg, and 10 mm - 54 kg.
The new standard in the production of these boards is different in that they have significantly less weight. In addition to the standard dimensions of the DSP, you can order slabs with a length of 3600 or 3000 millimeters. DSPs are delivered to sales points with precisely cut off sides that do not require treatment with an antiseptic. This component is included in the original composition of the material.
As a rule, domestic manufacturers do not sin poor quality of DSP.Therefore, if you performed the work through the use of such plates and after a while discovered their swelling, be aware that you acquired the material, alas, not of Russian production. These plates are clearly made somewhere in Asia, because there the technology of manufacturing this DSP is lame.
As for the DSP produced by domestic manufacturers, even with very strong frost, the strength and moisture resistance properties of the board do not lose. Therefore, the design in which the DSP is used will last very long. To finish the surface, a primer or a coating that repels water is a sufficient measure.
Structures made of DSP are able to withstand heavy loads during operation, as the material has excellent technical characteristics: strength, resistance to many environmental factors, moisture resistance. Plates of large sizes can be used for arranging doors, countertops or internal partitions. The guarantee of quality and the possibility of long operation is the correct installation of the DSP, because unprofessional work reduces the quality of the boards.
Fences from DSP
If you need to choose a quality material for the construction of the fence, stop on cement-particle boards. This is the most successful option, since such material will not only give rigidity to the skeleton, but also provide high-quality protection against moisture penetration.
When erecting a fence from a DSP, it is necessary to take into account the fact that under the influence of changes in humidity the slabs can be deformed. This can to a certain extent limit the scope of the material. To avoid distortion of the fence surface from the DSP, small gaps of only 8 millimeters should be left between the plates. You can beautifully decorate them, that is, turn them into design elements, or cover them with racks.
The peculiarity of the fence of their DSPs is that it will be more profitable in financial terms in relation to fences made of corrugated board or OSB.To install a good fence, in addition to purchasing plates, you should take care of buying galvanized nails, whose diameter is 2.5 millimeters. The length of the nail should be equal to the double index of the thickness of the DSP.In addition, in order to fix the plates on the poles, you will need screws, as well as special rivets.