The device of partitions from the GKL system KNAUF

Installation of partition with 111

We will consider the very first option, since they are the most common and most often used in everyday life. This requires a Knauf partition with 111.

This partition is a complete set of special materials for the construction task. Has a number of advantages over other similar products:

• The most economical and quality choice.
• At the time of installation, all unpleasant and inconvenient processes such as "wet"( additional processing) are excluded.
• Made of environmentally friendly materials and influences the microclimate in a positive way. The fact that a sheet of drywall can "breathe", that is, absorb excess moisture and allocate it evenly with a lack of moisture.
• Increased heat and sound insulation.

Let's move directly to the installation. For this we will need:

• Pencil and chalk.
• Level
• Plumb Line
• Roulette.
• Self-tapping screws.
• Scissors for metal.

You can start work. The arrangement of partitions from gypsum plasterboard sheets of Glycl on the KNAUF system is much simpler than it may seem at first glance.

1. The marking for fastening is done with a pencil and chalk, the level is also needed. For ceiling walls, use a plumb line.
2. The guide profile( vertical) is fixed exactly along the lines. To do this, use the level.
3. We fix the profile on the ceiling.
4. The profile to the floor must be secured with a bar. Its width should be the same as that of the profile. On the bar, it is worth noting the places in which the vertical profile will be fastened.
5. If necessary, you can cut the profile according to the height of the partition. The lower and upper parts must be aligned with marks on profiles that are attached to the ceiling and floor. You can use welding clamps to fix the profiles.
6. Horizontal profiles are attached very simply - between vertical profiles.
7. It is important to take into account one point - the holes for communications. It is better to think about this in advance. It is necessary to make holes in the vertical profiles and insert plastic sleeves.
8. We fasten sheets of drywall.

Everything, it's ready. As you can see, the arrangement of partitions made of gypsum plasterboard sheets of GCL according to the KNAUF system is very simple. It remains only to restore order and enjoy the success of the work done.