How to overlay the stove with tiles, tiles, than glue.

click fraud protection

Surface preparation - the best guarantee of quality

Before you glue the tile on the stove, you need to do some preparatory work to help ensure the expected result from the process. It is worth remembering that laying the tiles on the stove can not be carried out when the heating system is functioning. What is the main problem in this case? Correctly, the main problem of the heating structure is its uneven rough surface. This is a consequence of the following factors:

  • Uneven initial brickwork;
  • Presence of obsolete plaster;
  • Application in the old solution of straw.

All these unevennesses must be eliminated with a spatula and a metal brush. After the rough surface of the furnace structure has been prepared, it must be covered with a deep penetration primer. In addition, all existing joints need to be buried so that the adhesive mixture does not lag behind in the places of the old solution.

Tile laying - creative process

The very first thing that is required from a master is to decide what to put on the stove. For this purpose, ceramic tiles are used for the stove, because it is able to withstand sufficiently high heating temperatures. After the preparation process, you can proceed with the laying of the tile material itself.

Important! Do not rush with the beginning of such works, because the first row of tile material should lie perfectly flat and horizontally.

As adhesive, you can use both new building materials and standard mortar. If the second option is chosen, then it is necessary to add salt to the cement mixture. This type of work has a practical similarity to the laying of simple tiles on a wall or floor. The tile for the stove falls from the bottom up, observe the clear distance between the individual elements. For this you can use special construction crosses, which you do not need to forget to pull out after setting the adhesive mixture.

The adhesive is applied to the surface of the oven structure with a special notched trowel, which will allow an equal amount of glue to be applied to the walls of the oven. Do not forget that you need to constantly check the level of the laid row of tiles, because after drying the glue to fix the defective elements will be impossible. Grout all joints should be carried out not earlier than a day after the end of the masonry works.

Tile is not only a beautiful appearance

The use of ceramic tiles for the lining of the stove construction has several qualities that allow this method of decoration to be in high demand. On the positive side of this method of furnishing the furnace is:

  • Attractive appearance;
  • High reliability of finish;
  • Additional heat dissipation properties of the furnace walls;
  • High heating rate of all living space.

Important! It is necessary to comply in detail with all recommendations for the preparation of a special glue, which will be used for finishing the oven structure. If you have not yet figured out how to tile the stove, the video from our site will help you with this.

instagram viewer