The essence of ventilation in the house
In each house, in each apartment there are special ventilation holes that allow not only to maintain the normal composition of air, but also quickly remove from the room unpleasant odors, vapor particles and gas combustion residues.
The main task of the builders is the development of ventilation, which will allow maintaining the normal humidity in the room, where hot water is constantly used. It happens that the ventilation systems planned by architects do not cope with the task, in this case it is required to turn to professionals for help.
As a rule, the houses use a natural ventilation system. The fact is that the structure of the ventilation pipes allows the air to be vented outside due to the difference in temperatures on the street and inside the house, and also due to atmospheric pressure.
Ventilation grilles can often be seen in the bathroom and toilet, because these places need a qualitative outflow of air. Water vapor, unpleasant smells, substances produced by working with a gas stove get into the ventilation. In the bathroom and toilet the humidity of the air always remains high.
To answer the question how to make ventilation in the bathroom, it is not necessary to be an expert in the field of construction. Do not allow long contact of walls and other surfaces with steam, all of which can lead to corrosion and mildew.
It is enough to see how often after mistaking the shower fogging is formed on the mirror to check the quality of natural ventilation.
How to fix the problem of poor ventilation?
Quality ventilation in the bathroom and toilet - the guarantee of a comfortable life in the apartment. As a rule, there is one shaft in the house through which air comes out, approaches to it are branched into the kitchen and into the bathroom. If the exhaust power is not enough, you can try to solve the problem. At the moment there are three effective options.
The first requires the costs of paying engineers, they calculate the aerodynamics of the apartment and recommend that you carry out this or that repair. Another option that allows for a long time to solve all the problems of conditioning an entire apartment is the installation of a unified climate control system.
If the person is not ready to spend large sums, you can install the ventilation in the bathroom yourself, strictly observing the instructions. First of all, at the preparation stage, you need to release the hood from the grate, clean it, removing excess dust, dirt and cobwebs. As a rule, craftsmen put a fan on the hood, which helps to quickly remove unnecessary air saturated with moisture.
Enhanced ventilation in the bathroom - solutions for
The most important step in the entire installation process and the creation of bathroom ventilation - is the correct choice of the fan. Going to a specialized store, an unprepared person may become confused, but one should not be afraid of difficulties, practice shows that anyone can cope with the task.
The fan running from the switch starts working immediately after the light in the bathroom lights up. Also, there are fan versions for the bathroom, equipped with the most real timer. Setting the time of work, the owner of the apartment can set up the device at will.
To install forced ventilation in the bathroom, you need to insert the fan you bought into the hole that is made for natural ventilation. All his body along with the engine must be hidden inside, so when buying, consider the perimeter of the hole.
After installing the device inside you will have to close the grate and take the wiring out of the bathroom or toilet. There, it is enclosed in a chain with a switch, if you decide to use this activation option, which is very convenient for the toilet in particular.
But there is one nuance when connecting directly to the relay, wiring the wiring from the fan into the common circuit is necessary before the transformer, which changes the voltage for special low-voltage lamps, if, of course, there is one in your apartment.
The motor with the timer will be useful for the kitchen, with activation through the switch - for the toilet, with a humidity sensor - for the bathroom. In the latter case, make sure that the fan and wiring are well protected from splashes.
This ventilation installation in the bathroom must be in accordance with all the requirements of the manufacturers. This option will appeal to those who are well versed in connecting devices. If a person does not have any work skills in such a situation, it is best to use the option of installing the supply ventilation.
In fact, you need to take two not too wide ducts( pipe parts), a special filter located inside the system, and tools for mounting. Before you begin to work, you need to consult with professional builders, they will help determine the optimal location for creating new holes.