Casing on windows with own hands

click fraud protection

Decoration of the facade of the house is an important step. Since ancient times, people have tried to make the face of the house unique, covering the space near the door and windows with intricate carvings. Our ancestors gave each sacred meaning a sacred meaning and hoped that these golden laces would protect the dwelling from the penetration of dark forces. Fashion for the olden times leads to the fact that today the ancient traditions are again in demand. In this article, we will talk about how to make the platbands on the windows with their own hands.

Contents

  1. Design
  2. Sawing
  3. Surface grinding
  4. Primer and paint
  5. Assembling
  6. Assembling
  7. Cramming video on windows with your own hands

Project

Any business should start with a project. First, paint the facade part of the building, taking into account all the details actually available. Then you need to draw a drawing of carved clypees on the windows. You can also use the drawings and diagrams presented on the site.

Using a visualization program, if there is one, you can make a 3D project at home. He will show everything in a complex, will allow to estimate, how much the wooden platbands on windows are pleasant.

When the project documentation is ready, prepare a set of tools that will be useful for the performance of future work.

  • screwdriver;Wood drill bit( 12 mm);
  • ;
  • jigsaw, preferably with a smooth start, without it it will be difficult to cut complex elements;
  • grinding machine.

Care should be taken for the material for future casings. Traditionally, pine boards of high quality are used, with a minimum number of knots. If the knots are on the surface of the boards, then it is necessary to cut in such a way as to prevent the knot from coming into place.

Edge cutting

Manufacturing of window frames with windows starts with cuts that need to be made from the inside. First drill holes on the contour of the picture, where it is supposed to make later the openwork patterns. The video shows that when working the drill must be kept perpendicular to the surface of the board.

Next, using a jigsaw saw cut the pattern itself. Work starts from the hole and cuts along the contour of the pattern.

When the through patterns are ready, cut out the outer contour.

The tool must be driven from one end to the other, the direction does not matter. Pre-make the notches in the middle part.

As a result, you get a finished part for window decoration. Next, produce the same in mirror reflection to use it on the opposite side.

Surface grinding

To give the wood the optimum appearance, it is processed using a grinder, the emery wheel of which must have a grain size of 80. As a result, a smooth surface is obtained ready for painting.

Primer and paint

Before painting, wood is treated with an antiseptic that protects it from decay, from bark beetles. This composition should be applied to the entire surface, not missing even hard-to-reach places. The thoroughness of the work will allow the casings to last for many years.

When the composition is applied, the workpieces must be carefully dried, and only then do the coloring of the parts. Optimal option - water-based paint, designed for woodwork. The planks on the windows in the wooden house are painted in the color that is stated in the project. For this project we use colors of two colors: white and cherry.

Works are carried out with the help of 2 brushes: wide( 50 mm) and narrow( 20 mm).The first - for painting external surfaces, the second - for internal surfaces.

It is necessary to carefully paint details, not leaving uncovered places. After the first layer has dried, a second layer is applied.

Next, you need to process the workpiece with varnish. For this purpose, acrylic lacquer on a water basis is suitable.

One layer is enough. Care is taken in the work. Sub-flows can completely spoil the overall picture. Dry products should be in normal conditions - outdoors.

Assembling

It is better to assemble blanks into a single composition on a horizontal surface. This is much more convenient than directly on the window.

The parts are fastened to each other in accordance with the sketch with the help of self-tapping screws on the inside. Then the front side will not be spoiled by the kind of fasteners.

Mounting

The latest recommendations on how to make trim for windows, are associated with the features of the installation. To fasten the module to a window that is high above the ground, scaffolds will be needed. Installation lead self-tapping screws. To install volumetric elements, it is better to impose an assistant.

If all the work is done correctly, the result of the work will please more than one year.

Video of casing construction on windows with own hands

instagram viewer