These mixers are bought quite often. And it's not just that the idea of replacing it comes during repair or after the next "visit" visit. They break down or become uncomfortable over time. And, unfortunately, this is not uncommon. To properly approach the choice of a particular model of the mixer for bath and shower, you should know what they are and what they have advantages and disadvantages.
All of them have a spout and a shower head with a hose. Depending on the manufacturer and the installation site, their design has its own characteristics.
Features of faucets for bath and shower
Spout
It can be both fixed and rotary. In addition, its length also varies. When choosing a particular model, you need to be oriented both to the dimensions of the bath and to the location of the mixer.
Switch modes
Switches bath-shower is available on almost all models, but its execution is different. It is necessary to focus, first of all, on the convenience of using this regulator. Some elite models have electronic control, but this is already an amateur. It should be understood that the simpler the arrangement of any "mechanism", the less likely it is to break.
How to install
Here you can find different options for fixing mixers. The traditional place of installation is on the wall. Recently, products are produced, intended for mounting directly on the edge of the acrylic bath. If the decoration of the bathroom is equipped with a rim of tiles, then you can install it on it. In this case, it is advisable to use accessories for a vertical installation. Selection of components should be made, taking into account all the "dimensions" in the place of the intended attachment of the mixer. In other words, we need an individual approach.
The distance from the end wall of the bathroom to the wall should be taken into account. If it is small( less than 15 cm), then the spout will perfectly fit without turning. By the way, such a model is more reliable, since there is no self-rotating "mechanism".The gasket located in this place wears out quite quickly from frequent turns of the spout, and water begins to flow through its tube. Therefore, repair is needed.
Mixer type
The main types of bathtub / shower mixers are three: with a thermostat, single-lever and( more conventional) two-valve.
Thermostats are quite convenient, because they give water of the temperature that is set by the user. There is no need to turn the valves to achieve the desired result.
Single-handles are simple to operate, however, their weak point is the cartridge. How to choose it - a separate conversation. It is only necessary to mention that if water without admixtures of large particles( or after the filter), it is better that it be ceramic.
Two-valve allows more economical use of water. This is true if the apartment is a meter. More reliable models - with a ceramic tap-axle.
Material and manufacturers
Chromium products are widely used now - they can be found in all stores. There is a claim that any microorganisms die on this metal, which is preferable from the point of view of health. There are mixers and brass, and this is a good option. It should be understood that if the mixer is made of several materials, then the main attention should be paid to the quality of the coating( enamel).
