As a rule, when choosing a gas hob, we are guided not least by the cost. But does it always correspond to quality? This one. But, probably, it is much more expedient to determine - this is really what you want, this will be enough? After all, there is no sense in paying for certain functions of technology, which, in principle, we do not need.
Such a statement of the question will make it much easier to choose the most suitable model of the hob. After all, if you look at the price range, then it is so vast - from 3 to 145 thousand rubles - that it is useless to choose a product only with an eye for its value.
Construction
Gas hobs are available in two versions - independent( in the form of a separate panel) or dependent( in one housing with an "oven", on which the controls are located).In the latter case, the product differs little from the gas stove, except in dimensions that allow it to be integrated into the headset.
Panels can be in angular design, which helps to more efficiently use the free space in rooms with small dimensions - see for yourself.
Material
Glass ceramics - the most expensive models are mainly from this category. In addition to the high price, there are also 2 significant drawbacks - ceramics are easily damaged by a "pinpoint" impact and crack at sudden changes in temperature( for example, when cold drops fall on a hot surface).
" Stainless steel " - are polished or matt. The most practical products in terms of surface care.
Enamel panels - the cheapest. The case is sturdy( steel), but the coating requires proper care."Burnt" spots( milk, fat, etc.) are much harder to clean.
Aluminum alloys - these products are considered to be the strongest.
Toughened glass - excellent wash, great look, but it's quite easy to scratch.
Number of burners
We are accustomed to use 4.This is quite enough for the average family. But this parameter determines the dimensions of the product. Therefore, it is necessary to focus on the convenience of placing the product indoors( in the kitchen, in the cottage) and using it.
cooking surfaces are usually a standard size width - 0,6 m. Narrower( 45 cm) equipped with three burners 30 cm - two.
More extensive products allow the installation of up to 6 burners, as well as various additional elements( for example, gratings).
Kinds of burners
The most effective design is the "Triple Crown".It gives 3 rows of( annular) flames, which ensures uniform heating of the entire surface of the dishes. This is especially convenient if it is quite large, as the burner, which is the customary for us, performs maximum heat only at the "point" of the flame. But models with such design features are cheaper than 5,000 rubles are not sold.
Lattice
It can be either calculated for the whole surface, or individual( for 1 burner) or sectional( for several).With the latter two it is much easier to maintain the surface of the panel.
Flame control system
Controls can be traditional rotary, recessed or touch. The latter principle of regulation implies not only the inclusion of the burner, but also the control of the intensity of the flame( more or less).In fact - this is a kind of "navorot", which only leads to a rise in the cost of the product. Whether the team is highly questionable, given the experience of the use of such panels shows - electronic regulation of the flame is more "rough"( in fact, the speed) than the manual.
Ignition system
There is a "one" - or "two-hand".The difference is clear from the title, and the choice is determined by those who are more comfortable using the panel.
Automation and Service Functions
It makes sense to list all the protections and "services" that a hob can be equipped with.
- Flame monitoring system( "gas control").The function is necessary, especially if the room is constantly blown by drafts. The built-in thermocouple is connected to a shut-off e / m valve, which blocks the line in the event of a flame failure.
- Function of locking the controls. It protects the device from unauthorized interference in its work by others. For example, small children, inadequate people. If it is on, the control buttons do not respond to any manipulation with them.
- Quick shutdown function.
- Indication of the current temperature( residual heat).
- Overheat protection circuit. When the temperature increase is critical for electronics, the fan automatically starts or the combustion is completely turned off.
- Self-monitoring system. Like many other household appliances, there is a display on the LCD.It displays not only the current operating parameters, but also the fault code, which is detected in the self-diagnosis mode.
- "Repojig".This service is not provided in all panels. The point is that when the flame is extinguished, the ignition is re-done automatically. If after the second attempt the flame does not appear, then the shutoff valve operates.
- Timer.
- Electronic clock.
Conclusion
- There is no point in focusing on a single manufacturer. All models are good in their own way. It is enough just to point out the most popular brands - Kuppersberg, Siemens, Whirlpool and a number of others. And what to pay attention to, is already clear.
- For an average number of family members enough panels for 4 hot plates.
- When choosing a model, it is necessary to focus primarily on the possibility of placement in a particular room and the availability of the required minimum of functions. The main criteria are convenience in work for the hostess of the house and safety.
Useful advices for
- Practice shows that the simpler the device of any device, the less often it breaks down.
- If it is decided to purchase a "dependent" type model, then it is necessary to take into account the compatibility of the elements( panel and oven) even from one Manufacturer. By the way, the typical sizes of cabinets for built-in appliances can be found here.
And one more little thought. Almost every day there are various novelties, the merits of which are painted with advertising, that I want to go and buy this instant. There is one BUT in this case. Since there is no experience of practical application, there can be no statistics. For example, by the number of hours worked before the first failure, according to the most "weak" structural elements. This also can not be forgotten if the Seller actively recommends a model that has just appeared on sale.
