Why is it important to do the correct installation?
Metal tile - a material that is used as a decorative coating, rather light and plastic, looks expensive and attractive. Wide sheets allow you to do laying with a minimum number of joints, which is why experts and buyers note their high strength and efficiency in protection from precipitation.
The correct installation, which strongly affects the service life, is multistage, with each item being compulsory. So, in the beginning, the insulation of the structure is carried out, as a rule, the material is laid between the rafters. Next, waterproofing is carried out, which can be combined with a vapor barrier. The next item is a competent installation of hooks for the gutter, the crate and the cornice bar. Knowing the simple rules of laying metal, observing the safety rules, you can get an excellent result. Calculate the consumption of screws for metal tiles is not difficult, just remember the rule "not less than six screws per meter."For working with metal tile, self-tapping screws with rubber lining are used, the façade fasteners may be needed in some cases.
Screws and screws for metal tiles
Self-tapping screws on the ridge should be used at the very first stage, preparing the surface for work. They allow you to align the sheets on the ledge, they must first be fixed in several places and proceed to painstaking work.
Self-tapping bolts with bolts can also be used, they are needed to fasten special constructions, which will be pressurized( for example, snow-blocking device).
It is interesting that in recent years screws for metal tiles almost completely replaced the usual nails. This is due to the fact that work with screws goes much faster, and the result exceeds all expectations. Modern materials allow you to create practical and durable accessories for working with the roof. They are not susceptible to rust and retain their functions for many years.
The task of the screw - to ensure watertightness for the entire period of operation of the roof. If unpleasant changes begin to occur on the surface, the screw can easily be unscrewed and necessary repairs can be made without damaging the roof.
Sealing washers that are sold as a kit are also designed to provide reliability and additional protection.
How to tie metal - a few practical tips
Ideally, these small but extremely important parts are made of stainless steel. Also, the option of using screws made of carbon steel, the distinguishing feature of which is the zinc coating, is allowed. To understand how to fasten the metal tile , it is possible in a few minutes, this is the main convenience of modern accessories for construction and finishing.
In order for all the work to pass as easily as possible, you need to calculate the number of sheets, screws and washers in advance, as well as purchase special equipment that will quickly lift large sheets on the roof.
In the lower part of the wave is fastened roofing screw, if you listen to the advice of manufacturers, it can be understood that the best option - fastening, made in the deflection of the wave. In this way, passing step by step and planning the place of screwing fasteners, you can quickly install metal roofing and enjoy a sheltered roof, which is not afraid of rain and wind.
