Installation of roller blinds on plastic windows

click fraud protection

Roller blinds can be installed without the use of a master. Initially, the performer needs to perform assembly of the kit, prepare fixings for fixing the main pipe. The brackets can be fixed using self-tapping screws, adhesive tape and PVC staples. Install the roller blinds on the plastic windows with their own hands, according to the instructions, every householder can.

Content

  1. Preparing to install blinds for plastic windows
  2. Step by Step Tips and Tricks Video
  3. installation of roller blinds on windows

Preparing to install blinds for plastic windows

The work begins with the collection of the purchased kit. In the pipe to which the curtain is attached, on the one hand you need to install a plug.

On the opposite side, the control mechanism is fixed( the block with the chain).

Prepared roll must be attached to the installation site: you need to put accurate marks for the subsequent drilling holes and the correct mounting brackets. The most correct solution will be the additional use of the level. He will help to conduct training without errors, eliminate the uneven attachment of curtains.

The use of double-sided adhesive tape will simplify the installation task. It will help to fix the brackets.

The plus of this method is the speed of the conduct, the lack of requirements for skills in construction work on the part of the performer. Applying a thick tape and special plastic hooks can be minimized job: owner need only one self-tapping screw the bracket( near the chain mechanism) or and does not use screws.

Step-by-step instruction

After preparation for installation, you must proceed to assemble the remaining components of the kit. The connection of parts can be carried out according to the standard manual included in the kit. In addition, it is recommended to study the attached video, which clearly demonstrates the stages of work. It will help you to understand the rules of layout and such instruction:

1. The retainer( bracket) is installed in the bracket.

2. A fishing line is drawn through the lower hole of the bracket( it is responsible for raising and lowering the curtains), a knot is tied on the edge.

3. The free end of the line is passed through the ring on the guide, it extends into the lower lock.

4. Adhesive tape adheres to the bracket.

5. The location of the staples is determined according to the length of the curtain with the plug and the chain mechanism.

6. The outer layer is removed from the adhesive tape, after which the staples are fixed on the window.

7. We put both tabs in the holes of the blinds of the curtain weighting agent.

8. We fix the bracket on the side of the control mechanism of the curtain by self-tapping screws. We put the second bracket on the other side, attach it.

9. Magnets( on the window side) are attached to the bar of the curtain weights.

This algorithm will help you learn how to hang a roller blind on a window, minimizing the integrity of the plastic or wooden frame. But the performer should remember that with this fastening the window can be closed only with a little effort. PVC staples make it easy to use it in the ventilation mode or keep completely open. But the additional element slightly complicates the closing process.

Useful tips

When using adhesive tape, the homeowner must first clean the window surface from dust, grease formations. Adhesive tape is correctly glued only to the cleaned frame.

To observe the precautions, it is necessary to attach a special chain holder to the window. He will not allow a small child to reach out to a freely hanging thread.

It is also recommended that you view the attached photos, allowing you to learn more about the procedure. Given these tips, it will not be difficult to complete the work without any errors. Completely erection takes about 2 hours. Therefore, each stage of the work can be done without haste, observing the requirements and conditions of assembly.

Video for installation of roller blinds on windows

instagram viewer