Equipment for cutting and cleaning pipes

Advantages of polyethylene pipes of HDPE type

Polyethylene is processed and welded only at low pressure, but as a result, it is possible to obtain a literally perfect product that will become an assistant for both everyday life and for an industrial enterprise.

1. Has inert chemical reagents that provide durability. The inert tube is characterized by resistance to irritants.
2. The ideal ratio of flexibility of rigidity, which allows you to put them in the ground at 8-10 meters. Adjusts to the motion of the earth and can bend in any direction, in a reasonable radius of deflection.
3. High level of sound insulation.
4. Frost resistance. It will not burst and will not freeze.
5. Elasticity. Carries all kinds of linear deformations.

What are the types of HDPE pipes?

The assortment of HDPE is wide - it allows a diameter of 15-1600 mm. Designers of water pipes are delighted with these products, as they are optimal for industry and household and communal services. Imagine cutting a pipe with a diameter of 100 mm for collectors. The task is not simple, but more than cutting a finished device 1.6 m.

Pipe cutting equipment: tools

It is necessary to cut so that there are no burrs and creases on the surface. Therefore, such types of cutting equipment are included in the number of tools.

1. Pipe guillotines, capable of cutting from 6 cm to 35 cm. And the incision will be of very high quality.
2. Circular cutting torch. For cutting from 1, 5 cm to 16 cm. Cut water, sewage, and pipes of external highways.
3. The manual pipe cutter cuts from 1, 5 cm to 3 cm. But it does not make neat cuts and requires processing with a calibrator.
4. Electronic cutting machine. The purchase is expensive, but is justified by its efficiency and wide range of work. Electric cutters are used by plumbers and are convenient, as for a hand tool.
5. Band saw is the most expensive device of all, but as a working tool it's just perfect. Saws 1, 6 meter tubes with a perfect cut.

Please note that in general, you can cope with cutting with any equipment, including a hand-held machine and a mechanical and electronic device. It all depends on your needs, diameter and rolled.

Methods of cleaning the sewerage

All comfort in the house is broken, as soon as one of the sinks in the house is hammered, and even all sewage outlets. What to do with this problem of plagued plum?

Plumbers share ways to clean the sewer pipes. There are only 2.

1. Mechanical
2. Chemical.

Obviously, the chemical method implies the use of all sorts of chemical means to combat blockages. Reagents easily cope with organic clogs, but, unfortunately, are powerless before more serious pollution.

But the mechanical method is divided into several subspecies depending on the tools used in the cleaning process. The method is the most troublesome, but also the most effective. Use such devices:

• Vantuz. Used at the slightest difficulty of washing off the oxen in the sink. With large clogs can not cope. In order to use it, you need to pour water into the sink and use a plunger to make movements similar to the suction cup. The pressure caused inside the pipe will push the blockage. Cheap way and you can buy in any store of sanitary ware and industrial goods.
• Plumbing cable. Use, if the plunger did not help, only in this case will come to partially disassemble the plumbing equipment. The cable is inserted into the pipe to the jam and, after reaching it, punch, then rinse with plenty of water. You can buy in the store plumbing.
• Hydrodynamic nozzle. Works on the principle of water injection and erosion of pollution by high pressure. Just a strong water pressure breaks any blockages. Also after rinse with plenty of water. Such attachments are used by specialized plumbers. Expensive equipment.

Any of these devices can use chemical reagents, they will help dissolve old contaminants on the walls of pipes. Good luck to you!