Vinyl siding under a log - we make out a house for natural materials

Vinyl siding - where does this popularity come from?

The vinyl facade siding facade is comfortable, easy to implement and affordable for the family budget. This material is a molded panel thickness of 1 mm, simulating wood, stone or brick. In construction, these panels are also used to conceal heat insulation materials located on the outside of the building. Thus, they contribute to increasing the thermal insulation. And also allow you to save on the facing brick and facilitate the construction of the building.

Vinyl lining is a non-toxic and non-flammable building material that is resistant to chemicals. The popularity of this material is also promoted by water resistance, it is not afraid of rains, termites, does not burn out in the sun, does not rust, does not rot, does not scratch and does not bubble. Buying and furnishing this house with your own material, you get an unrivaled coverage with minimal maintenance costs. Care of siding panels is limited to washing once a year. If the surface is heavily soiled, you can use an improvised detergent.

What types of vinyl siding can be found on the market?

As you know, demand creates supply, and the popularity of this material allowed manufacturers to produce different types of vinyl siding:

1. Socket siding .Durable and durable lining material. Actually, vinyl siding for stone is widely used for finishing houses, buildings and structures, giving them a refined and well-groomed appearance.
2. Vinyl siding for brick .Using this type allows you to significantly save on natural materials. Such panels not only perfectly imitate color, but also convey the texture and depth of the picture of natural materials.
3. Vinyl siding for log is an excellent solution for decorating the exterior walls of a building. Due to the fact that the house made of natural materials is too expensive, impractical and relatively short-lived, finishing it under the beam will favorably emphasize the stylish appearance of the house and give it a chic. At the same time, the quality of the siding panels is so high that you can only detect the trick by feeling it.

Finishing with vinyl siding - preparatory work

Before installing vinyl siding, you must carefully prepare the walls for this process. The smoother the surface of the wall is for the finish, the better the will be made with the vinyl siding .

1. Stripping the walls. It implies the dismantling of all the grilles, drainpipes, lantern fasteners, etc. from the outside walls of the building. It is also desirable to clean the walls of old finishing materials.
2. Installation of a siding for installation of siding. The rims are made of wooden slats or galvanized profile. If it is supposed to be wooden, then it is necessary to reject the curve and raw material, and the remaining rails soak with antiseptic liquid.
3. When fixing horizontal slats with rails or profiles, it is necessary to install vertically, with a step of 500 mm, and further strengthen the frame in the vicinity of windows, doors, other openings, as well as in the corners of the building, from above and from below.
4. Wall insulation for siding installation. When installing a shed for installing siding panels, it is possible to warm the house from the outside without using the internal space.
5. Sealing. It is necessary to pour sealant all the places on the walls, where water can penetrate.

How is the correct siding made with vinyl siding?

To perform the installation you need a level, a hammer, a hacksaw for metal, a punch, a punch, a tape measure and a chalk. Carry out work, preferably in goggles. To all the advantages of this material can be added and the fact that its installation does not depend on the time of year. Installation of this type of siding in winter is allowed up to -15 ° C.Consider the features of mounting siding panels.

1. Installation of siding panels begins with the installation of a number of accessories. This procedure involves setting the start profile, the outer / inner corner, the edging of the window and door openings and the determination of the initial mounting point.
2. After installation of all fittings, the first siding panel is installed.
3. If the length of the panel is not sufficient for mounting from angle to corner, then they are interconnected by means of a special profile.
4. On the first row of panels lay out the second, etc., connecting them together with the help of locks located on the siding panels.
5. When installing panels around doors and windows, they are, respectively, pruned.
6. Installation of soffits is carried out, and only after that the last line of siding is laid.

Work with vinyl siding can be entrusted to professionals. They will be able to quickly and correctly install this material on the outer walls of the building, where it will serve as faith and truth for many years.