Now we know how to close the pipes in the toilet from unnecessary eyes

How to close the pipes in the toilet: the ways and options for

They depend on what materials the builder and decorator will use, and the placement of pipes in the room is also taken into account.

1. When all water pipes are located in the corner of the room, along the walls, they can be covered with an ordinary decorative box. This method increases the functional area of ​​the room, and this is extremely necessary in the tiny rooms of the bathrooms.
2. When the pipes are in the center of the wall, you can install a false wall, which is decorated and decorated. During the execution of a false wall, you can adapt to it several shelves for storing household items, chemistry and other.

Preparing the

Before deciding how to close the pipes in the toilet and choosing a shelter, perform an analysis of the condition of these pipes, due to the possible need for repair.

Important! Cast iron, sewage and metal water pipes have a long service life, but often they form leaks. Proceeding from this, it is necessary to pay a lot of attention to the inspection and inspection of pipes, so that they do not have rust traces, which indicates a lack of integrity of the material.

If imperfections are detected, they must be eliminated immediately. Material number 1 in their elimination are polypropylene and PVC pipes, setting which you can forget about all sorts of accidents, moreover, hide such communications will be quite simple.

The next step in this work is the state of the wall surface. In order to hide the sewer and water drain, you need to get rid of a possible fungus or mold. It is worthwhile to understand that even the smallest area damaged by mold will lead to violation of walls and threatens the health of people.

Detected problem areas are cleaned of the old coating, then treated twice with antifungal agents( primer) to protect the walls. And only after that you can hide the pipes under the chosen decorative design.

The design of the decorative design of

The plastic panels and plasterboard have become the most successful for masking for some time now, since they are easy to assemble, are reasonably inexpensive and allow to fully realize the decorative idea of ​​the owners.

For the organization of this design, a frame is prepared in advance, which can be made of wooden racks of various sizes. Also, do not forget about the galvanized profile, which is much stronger for the floating structures and more resistant to moisture, deformation, etc.

Preparing the frame for false wall

1. A side profile is attached to the walls with a side( UD), which must have the correct angle ratio, because any distortion will lead to a loss of aesthetics. Fasten the profile with nails 6x40 or 6x60 mm( dowel).
2. More bridges between the profiles, only from the CD profile. Their size is not less than 50 cm. For both plastic and GCR.
3. For shut-off valves and water meter, doors must be installed. To lock the cabinet was stable, several more profiles are installed under the bottom of the door.

Preparation of a frame for a box

In order to install a plasterboard or plastic box for pipes in a toilet or bathroom it is necessary to adhere to the following list of actions:

1. The UD profile is fastened to the corner walls, then it retreats from 1.5-2 cm to avoid damagefrom self-tapping screws.
2. From the floor and from the ceiling stretch sections of the profile, which is placed according to a certain angle and provides the correct shape of the box.
3. The wall that will be angled is also mounted as a CD profile for stability.
4. As in the previous version, the elements are interconnected by jumpers, 50 cm in size. Also it is worth taking into consideration the degree of the box location, so that it is not crookedly located.
5. External trim of the frame

How to close the pipes in the toilet when there is only a PVC panel and GCR and is it real? Experts say that nothing more is needed.

It turns out that the optimal materials for finishing the cabinet walls are a PVC panel and a washable GKL, slightly less moisture-resistant plywood.

The PVC panel is installed:

• It is worth using a wide strip of plastic, up to about 37 cm. They allow you to close the box with one sheet.
• The same principle again uses profile panels UD - to create a design around the perimeter of the walls and ceiling.
• It is necessary to size the existing sheets of plasterboard and cut it. During cutting, the side bends and if it is necessary to cut, it will be necessary to use the inner side of the bend.
• In the absence of joining the strips, the panels are attached to the start profiles. And if you still need to join, then use self-tapping screws with a wide hat and jumpers to twist the inside.

In order to assemble all walls and panels of GCR, it is necessary to use self-tapping screws( 25 mm).If in the future the box was supposed to lay a tile, the surface of the panels should be treated with a primer. If you plan to paint the surface, then all panels and coatings must be plastered.

Following from the above, it becomes clear that working with panels hiding the pipes of the bathroom, the toilet is far from being professional, so everyone can handle it. So your patience and the least amount of effort can create results!