sawing with electric jigsaw - new features of
With the development of building technologies, new materials and tools are emerging. The power tool makes it possible to considerably simplify the work of a builder or a house master, and some work can not be done without its application at all. One such tool is an electric jigsaw.
Wood carving with a jigsaw can require the tool to have a pendulum stroke mode. This means that during the work the canvas does not only move forward and backward, but also, as it were, saws the material in front of it.
It is recommended to use the pendulum stroke only if it is necessary to make a straight cut. With this tool, if you have the right canvas, you can make straight and patterned cuts in many materials: different types of wood, brick, glass, ceramic tile, non-ferrous metals, plastic, plasterboard, steel( even stainless) and others.
The file changes very fast, unlike the usual hacksaw. Figured sawing with electric jigsaw on wood has risen to a new height with the advent of this tool. With the help of a jigsaw, it is possible to cut holes inside the part and saw at an angle.
What should the master remember before work?
Let's consider how to saw with a jigsaw. First of all, take care that you have new sharp saws. On sale there is always a wide range of various paintings. Blunt canvases will heavily load the engine, which is not recommended, and the edges will be torn.
Next you need to fix the saw piece. If the part is well fixed, the cutting will be more accurate and accurate. When cutting, do not press on the jigsaw in the direction of the cut, you need it to go freely. If you still have to crush, then the canvas is dull.
Cutting is not necessary along the line of marking, but next to it, this will make the cut more precise. If possible, put the workpiece face down. The working stroke of the blade occurs when moving upwards, respectively, the cut from the bottom of the part will be more accurate.
Thread with an electric jigsaw at an angle is made when fixing the support plate in the desired position. On most models, you can set the cutting angle: 15, 30, 45 degrees. First, it is better to cut an unnecessary board to check the angle with the protractor, and then proceed to a clean version.
Fret sawing with a jig saw has an undoubted merit, which is that when processing thin or sensitive workpieces the cuts come out very high quality, without burrs and lacerated edges.
How to behave in the process of cutting with a jigsaw?
Before sprouting spheroidal shapes inside the part, eg a hole for the right handle, the drill must first be drilled to fit the blade. Then you need to insert the canvas and turn on the tool. It is necessary to hold the cut out part so that the cloth does not snack.
Some precautions must be followed when operating this tool. Before sawing with a jigsaw, you need to make sure that the power cord is everywhere insulated. Avoid direct contact with the saw blade. The web should correspond to a certain type of sawed material.
When working, you need to use safety glasses, because it is worth bending to better consider the cut line, how the sawdust gets into the eyes, so you can get hurt or ruin the cut.
Before using the electric jigsaw, read the operating and maintenance instructions for the tool. Lubricate and clean your tool, this is a guarantee of its long and impeccable performance.