Installation curb stone in the country

click fraud protection

Correct installation of the curb is given great importance, as in large-scale road construction, and during the creation of landscape design. The border will perform two functions at once: aesthetic and practical. He will be able to decorate the landscape, delineate the road from the sidewalk, and also secure the canvas from the destruction of the paving slab.

Contents

  1. What is a curb?
  2. Tools and materials
  3. Mounting technology
  4. Video laying the border yourself

What is a curb?

This roadway element is a very narrow strip of concrete. That's why paving the border is simple and straightforward. In general terms, the border can be:

  • Sadovym;
  • Decorative;
  • Lawned;
  • Road.

Tools and materials

To install the pavement border quickly and easily, you should prepare some tools and materials in advance:

  1. Garden shovel;
  2. Trimming;
  3. Pegs and cord;
  4. Construction level;
  5. Rubber hammer;
  6. Edge stone;
  7. Cement and sand.

As you can see from the photo, setting a curbstone does not require any specific tools and additional materials, which once again confirms the simplicity of this process.

The most difficult moment in the preparation of the above products will be the choice of a curb stone. To install a curb on the cottage you can choose a stone of different sizes, colors and shapes - all this will depend only on your desire and the design of landscape design. Few people know that you can make a stone yourself. To do this, buy special molds and mortar.

Installation technology

Consider the technology of installing the garden curb step by step:

Layout. To make the curb stone beautiful and right, you must make a marking with a cord and pegs.

Creating a trench. The trench should have a depth equal to 1/3 of the height of the curbstone, and the width - a few centimeters more than the width of the stone.

Substrate preparation. After the trench is ready, you need to put a bit of a solution of sand, water, cement( in the ratio 3: 1,2: 1) on its bottom. This will make it possible to significantly improve the curb fastening.

Definition of height. Many people often wonder how to set a curb of the same height? In fact, it can be done very simply. It is necessary to place the stones in the trench on both sides, carefully fix them, determine the desired width and pull the cord from one edge to the other.

Direct installation of the curb. Laying should be done clearly on the cord. If there is a need, then you can level the stone by pouring a mixture of sand and cement. In order not to get the curvature of the curb height, you need to maintain a small distance between the cord and the stone - about 1-2 mm. The curbstone should be laid clearly in the center, leaving room for a solution.

Mortar laying. After the curbstone has been installed, it must be fixed with cement mortar. The solution is poured on the sides - to the place that was left earlier. When the mortar is laid, you can check and level the stones with the help of a building level.

Video of laying the curb with your own hands

instagram viewer