How to remove a double-glazed window from the frame

Modern window constructions are a means of protecting the premises from heat loss and pollution, they provide reliable sound insulation and comfortable microclimate.

most fragile element of the window is glazed. It is subject to mechanical and physical damage, which necessitates replacement or repair of the glass. In order to do the work does not always need to call a specialist, you only need to know how to remove the double-glazed windows.

for removal of glass

Tom to remove the glazing of the window frame, as a rule, preceded by a number of significant motifs. Consider the main ones:

1. Broken glass is the most important reason for removing and replacing a damaged glass sheet.
2. Frosting or fogging the window is a sign that the double-glazed window has lost its sealing properties and needs to be repaired or replaced.
3. Decrease of soundproof characteristics, which entails discomfort of people living in the room. In

track for the as you tap base to replace an old design, it is necessary to pick up a new product based on the type, the thickness of the glass, and the amount of coating. However, the primary task is to remove the glass unit. This process, despite its apparent simplicity, nevertheless has a number of its subtleties, which should be considered separately.

replacement glazing in plastic frame

overwhelming majority of consumers chooses plastic windows, the dismantling of which has its own characteristics. This window has high strength, durability, provides ease of use and maintenance, as well as ease of maintenance. But when disassembling such a design, the main attention is paid to the removal of the double-glazed windows.

Preparations for dismantling

At the initial examination of the damaged windows tend opinion arises that dismantle of metal and plastic window is quite difficult from a technical point of view. However, there is a proven and simple method that should not be abused, so as not to damage the mechanisms.

It is necessary to adhere to the requirements and rules for carrying out work with the withdrawal of glass, to carry out each stage in a strict sequence. In addition, it is necessary to use special fastening materials, tools and equipment to avoid unpleasant consequences. So, to remove the double-glazed windows, you need to prepare the following:

• suckers made of rubber;
• ax;
• protective gloves;
• spatula;
• screwdrivers in the set;
• knife.

Preliminary demolition

box before putting it away Glazing, disassemble design Plastic windows, making possible actions carefully and accurately. Sequence of work is as follows:

1. Initially, it is necessary to remove the special fixing rod from the upper loops of the window.
2. Then remove it from the opening. At the same time, take extreme care, because the design of the insulating glass unit is light and not very convenient for holding by hand. It is better to attract one more assistant or to prepare special grips, the use of which will not allow the falling of the transom, damage to the glass or the door leaf.
3. Remove the removed plastic frame slowly and gently to the floor and lean it against the wall.
4. Then proceed to the dismantling of the hardware from the window sash. To do this, unscrew the locking hardware and unscrew the locking mechanism.
5. The window handle must be removed only using a special screwdriver, which is the same as the cross section of the element.

Important! In order to maximally uncomplicated to put a new double-glazed window in place of the removed structure, it is recommended to fold all the hardware in series, as it is used. This will save each element, without the risk of loss, and also visually indicate the return path for installing a new product in the window frame.

The process of removing the

double-glazed windows After carrying out the preparatory work and disassembling the window structure, it is possible to start dismantling the double-glazed unit. The sequence of actions is as follows:

1. Initially, it is necessary to prepare a knife or an ax - not too sharp, but not blunt, to ensure penetration into a narrow slit.
2. Then attach the tool to the double-glazed window between the fixing bead and frame, along the vertical seam. Actions must be carried out with extreme care, so as not to leave chips and scratches on the glass canvas upon completion of work.
3. It is necessary to press the whole length of the blade at once, so that it can fall into the right place and move the bead by at least 1 mm.

1. Slowly turning the handle, pull the window bead from the sash. Do the same with the whole frame.
2. Follow these steps, moving along the glass plane with your hands, remove the fastener. Do not pull it on yourself.
3. Similarly, repeat the process with the lower horizontal staple.

1. Then proceed to the dismantling of the vertical bead, and after him and the upper horizontal. To change this sequence is undesirable, since the glass can fall out earlier than necessary and be damaged.

1. Then gently pick up the top edge of the glass sheet and slightly tilt it on yourself.
2. Now you can remove the glass, holding it with both hands on the vertical ribs.
3. Double glazed window without a frame gently push to the wall.

Recommendations for the process:

• for uniform expansion of the structure it is desirable to use household brushes or simple towels;
• to remove the double-glazed window without much difficulty, you should gently push on the canvas from the outside, a little tipping it over;
• the place where the sealed insulating glass will be put must be prepared in advance - lay a thick cardboard sheet or blanket on the floor.

Replacement of double-glazed windows in a wooden frame

Double-glazed windows in wooden frames have their own installation features, implying the presence of an additional silicone layer under the glazing bead. Therefore, taking out the construction, it is necessary to cut off the sealant, holding the insulating glass from the possible loss.

Important! The glazing beads, as a rule, are made of wood, like the whole window frame. They are fixed by means of special pins, which are difficult to extract without a specialized tool. For this reason, the dismantling work must be done very carefully, so as not to damage the elements.

For the qualitative implementation of the dismantling and replacement of the double-glazed window in a wooden frame, it is necessary to prepare such tools:

• pneumatic gun to fill the sealant;
• spatulas;
• hairpin with a necessary bend of the studs;
• gloves;
• compressor.

The process of extraction of a double-glazed window from a wooden window structure takes place in the following sequence:

1. Initially, it is necessary to remove the glazing beads using special plastic blades. Actions should be carried out carefully, so as not to damage the paintwork of the frame.
2. Remove the sealant sealant by using a construction knife.
3. Lightly pressing on the top edge of the glass, remove it, tipping over. It is advisable to use vacuum suckers, to avoid the loss of glass from the hands.
4. Thoroughly clean the grooves and frame from various contaminants and the old silicone layer.
5. Carefully check the structure for mechanical damage or the appearance of a moldy fungus. If necessary, perform restoration work, repair chips and cracks.
6. Place the joint of the double-glazed window to be treated with a new layer of silicone from the outside of the window.

Manual with rules for dismantling of double-glazed windows is presented in the video: