The Internet today takes such a role in our lives that now there is practically no place where there is no possibility of connection to the network. Whether it's a metropolis or a remote village - the Internet occupies its own space in the homes and in the lives of their inhabitants. Almost all modern devices have the ability to connect, and no one is surprised by an interactive refrigerator or TV.Therefore, the installation and connection of sockets under the wired Internet is a very topical topic and if you have not yet faced this task, then chances are that sooner or later it will happen. You can call the wizard from your ISP's personnel for the installation of the RJ-45 socket, although you can do it yourself if you want. In the wires for connecting to the Internet low-voltage currents flow and when connecting the RJ-45 outlet, you can not be afraid of electric shock. If you decide to do the work without resorting to help, this article with the video will help you in this.
Contents
- Connection diagram of socket RJ-45
- Video connection socket RJ-45
The network outlet RJ-45 is a standard product, depending on the manufacturer, differing only in appearance. Asking the question, how many sockets for the phone, and which for the Internet to install, you can not hesitate to install a socket for connecting to the Internet RJ-45, since you can bring a telephone wire to it and connect the phone.
Connection diagram of the RJ-45 socket
The connection diagram of the RJ-45 outlet does not present any particular complexity. Removing the outer insulation from the cable by two three centimeters, weave 4 pairs of wires and clean them from insulation, preferably with a special knife( stripper ).We open the case for internal connection of the RJ-45 outlet. We see that all the contacts are marked with a certain color corresponding to the necessary wire so that it will be difficult to make a mistake. The wires must be cleaned in such a way that the wire leaving the housing is covered by external insulation, and the bare part is only at the point of contact with the latch. In network outlets for connecting RJ-45 Legrand, it is not necessary to clean the insulation from twisted pairs.
The contacts of these outlets themselves penetrate the protective sheath of the wire. The models of these brands have proven themselves to be reliable, beautiful and easy to connect. The contact latches of the RJ-45 socket work on hold, and simply attach the appropriate wire to them and press on it with a knife or a thin screwdriver or close the special clip provided in some outlet models. After making sure that the contacts securely hold the wires at all points, insert the socket into the socket in the wall and turn the fixing bolts until the outlet is held in the desired position. Screw on or put on the top cover. In case the network cable is connected to the station, the RJ-45 socket can be used immediately for the intended purpose. The wire from the station must be removed into the wall or into a special wire channel.
In some cases, it makes sense to connect a double RJ-45 socket, because each computer needs its own port to connect to the network. The principle of connection and installation they have the same.
Video connection socket RJ-45
For clarity, we suggest you see the video lesson connecting the outlet RJ-45.
We wish you good luck and fast internet.
