How to install and connect an internet outlet, a TV outlet and a telephone

click fraud protection

Contents

  • 1 How to connect and install the
  • 2 internet socket How to connect and install the telephone socket
  • 3 How to connect and install the TV socket

How to install and connect telephone, Internet and TV outlets Almost all manufacturers of electrical installation systems( such as switches and electrical outlets) are engaged inand the release of other network products - television, telephone and network, that is, Internet outlets. Today we'll talk about how to install and connect an internet outlet, a TV outlet and a telephone.

Basically, the design of all products from one series should be consistent with each other - this is designed to ensure that the buyer has been able to maintain in its interior the integrity of the design idea. That is why it is customary to choose the whole series of this product.

How to install and connect telephone, Internet and TV outlets

. As for the installation of the sockets, we can say that the network, television and telephone sockets will be mounted in the same way, that is, in a similar way. Dipsticks here are used the same as in the version with electrical outlets and switches. The installation of the sockets is similar, but nevertheless it is worthwhile to know some nuances for each of them:

1. The first nuance is rather pleasant, since the voltage in the telephone and the signals in the network and TV sockets is minimal, which allows to ensure absolute safety of life and health of a person.

2. The second nuance is that the installation of these outlets requires special care and accuracy during connection. Special care should be taken to network or Internet outlets, as the correct pinout is very important here.

How to connect and install the Internet outlet

Let's start with this exactly. On the back of each network or Internet outlet, a special terminal must necessarily be located in order to connect a standard network cable. It can be represented by any clamping device, but most often it is a terminal block with eight screw springs. All eight pads are usually marked with a special color pointer, where each color is identical to the color of the connected wires, as follows - their four pairs. Wiring should be carefully cleaned and each in its place to fix.(see also the article on how to connect electrical wires.) After that, you need to check the network's performance. To do this, simply connect the computer. If the work is proceeding normally, then it is possible to make a finishing touch - to fix the sockets in the junks.

Instruments
Widget from SocialMart

Connecting the Internet network cable to the terminals - the color of the wires

How to connect and install telephone socket

Almost exactly the same, but even more simply connect telephone sockets. The terminal of such outlets consists of only four special connections. Therefore, it is necessary to connect the two cores of the telephone cable to contacts 2 and 3( the color of the wires is red and green).

How to install and connect telephone, Internet and TV outlets

How to connect and install a TV socket( TV)

As for the connection of TV( TV) outlets, first you need to know that they are of three kinds:

1. Single. They have little internal resistance.
2. Passing.
3. Finite. Their internal connection is increased.

Pass and end sockets are usually used if you need to install several television points without using an additional separation device. The advantage of such outlets is that they allow you to "untie" several TV sets at once, and also to reduce the influence of one receiver on the second one. And still here it is decent to save cable. But still this type of outlet has its own disadvantages - at the output of this system the signal level should be very large. If you can not afford it, then it's worth choosing single sockets using an amplifier-splitter signal.
This device has power wires and an adapter. There is one entrance and several exits. The adapter itself must be connected to the 220 V network, the input cable should be directed directly to the input, and the output cable to the outputs and further to the sockets.

On any television outlet from its rear, there must be a terminal screw terminal, usually located centrally. It is required to connect the central conductor of the TV cable. The braid with the screen must be fixed with a special clamp. But it is necessary to take into account that if you work with pass-through sockets, there will be such two central contacts, as well as two brackets for fixing.

Before connecting the cable, it must be carefully cleaned at the required length. The braid with the screen should be slightly cut off. Now, connect the core of the cable, and the remains of the shield with braiding clamp bracket-lock. But it is very important to make sure that the braid and the core of the cable do not close. Next, we check the operability of the connection and fix the sockets in the podrozetniki.

Now you can connect a TV outlet and install it without any problems. Stay with us on the site repairing the apartment yourself.

instagram viewer