Manufacturers of acrylic bathtubs: 8 best. Comparison and prices

Acrylic bathtub is a perfect modern solution for bathroom facilities. Acrylic baths are very popular among buyers all over the world, so the assortment presented in stores is very wide. Going for a purchase, you need to have at least an approximate idea of ​​the main characteristics and leading manufacturers of acrylic bathtubs and then it will be easier for you to make the right choice. All the necessary information is contained in this article.

There are many nuances that should be considered in order to choose a quality acrylic bath:

• Material type. Acrylic, which is used for production, baths can be cast or extruded. They are similar in chemical composition, but they have different degrees of strength. Cast acrylic is more preferable, since the bath of this material will last you much longer.
• Acrylic layer . It should be as thick as possible, at least 0,5-0,6 cm. This parameter should be paid special attention, because the majority of commercially available baths acrylic coating does not exceed 0.4 cm, so they quickly wear out.
• Appearance of acrylic coating. A quality acrylic bath must be white( of course, if you have not chosen any other color).On its surface there should be no roughness, it is always perfectly even and smooth.
• Number of materials used. In the production of acrylic baths, the acrylic coating is applied to the polyurethane base in order to provide greater rigidity. Therefore, the final product is two-layered. Bath, consisting of only one acrylic - a thing very fragile and fragile.
• Stiffness. This is undoubtedly one of the main criteria. After all, it depends on how tight the bath depends, how much weight it can withstand and what method of installation it will take( especially fragile products need additional reinforcement).To test an acrylic bath for rigidity is easy - just push harder on its bottom with your hand: if it is susceptible, then the product is not of high quality.
• Light transmission of material .This acrylic is not a transparent material. If the acrylic baths let in the light, then with a high probability it can be argued that there is a fake in front of you.
• External layer. As we have already explained, it is made of polyurethane. The outer surface of the acrylic bath must be dark and smooth to the touch. If it is rough and, moreover, produces an unpleasant chemical smell, then, most likely, the manufacturer decided to save and used fiberglass as a base mixed with synthetic resins. You should not buy such a bath.
• Frame construction. Ideally, it should be a mounting frame made for this particular bathtub model, legs that are height-adjustable and support at the corners. If there is only one frame, which is fastened directly under the rails, then such a construction will be quite unstable.
• Additional functions. If you do not need them, then do not overpay, buy an ordinary bath, as for a lot of "bloat" can hide the low quality of the product itself. If you, for example, need a bath with hydromassage, then pay attention to the producers who specialize precisely on this type of product.
• Shape. Than it is easier, the stronger and more stable the bath. Baths of large sizes or complex shapes should be of very high quality. Consequently, and they will be much more expensive.
• Discharge and overflow system. It can be traditional, semi-automatic or automatic. Each of them has its own merits and demerits, therefore it is a question solely of your individual preferences.

Acrylic, as a material for the manufacture of sanitary ware, has a lot of advantages over traditional materials: cast iron and steel. Acrylic bathrooms weigh very little, so you can easily mount the installation alone. In addition, the production technology allows you to produce acrylic bathtubs of various shapes and sizes. Such a variety of design can not boast of either steel or cast iron baths.

Among other advantages of acrylic baths, it is worth mentioning a rather low price, excellent thermal insulation and simple maintenance.

The baths of the Czech company "Ravak" are very popular in European countries. The production is carried out on modern equipment using high quality raw materials.

The main advantage of the baths of this manufacturer is the thick acrylic layer , thanks to which all products are very durable and wear-resistant. In addition, the company "Ravak" provides the buyer a large selection of acrylic bathtubs of non-standard shapes and sizes, including asymmetric fonts and baths with concave sides.

There are not many drawbacks to the products of this company. The most significant of these is the difficulties associated with the selection of accessories and accessories for some models.

Polish company "Cersanit" is well known to the Russian buyer. It is engaged in the production of not only sanitary equipment, but also finishing materials for the bathroom and kitchen.

Acrylic baths from this company are notable for being good quality products for a very reasonable price. The manufacturer provides for its products a warranty for a period of 7 years. The minus of the baths "Cersanit" is that they are covered with a thin enough layer of acrylic - only 0.4 cm, so they are not rigid enough and are subject to physical deterioration more quickly.

The Dutch company "Riho" uses acrylic of the highest quality for its baths. It is lightweight, durable and completely safe for the environment. The thickness of the acrylic layer on the baths of this manufacturer is 0.6-0.8 cm.

"Aquanet" is a Russian company that produces acrylic bathtubs. Among the advantages of the domestic manufacturer - a relatively small price, a large selection of models, as well as the availability of internal equipment - headrests, handrails and armrests. Minus - not enough thick acrylic layer - only 0.5 cm

Acrylic baths of the Spanish manufacturer "Pool SPA" are famous for their incredibly beautiful and thoughtful design .Simple, elegant forms, style-matched accessories - all this makes up a single ensemble and can decorate any bathroom. For each model there is a large selection of additional components. The lack of acrylic bathtubs from the "Pool SPA" lies in a high price, but the quality is worth it

Another well-known Russian manufacturer of acrylic bathtubs is BAS. Production is carried out on Italian equipment, using imported components, and therefore the products meet all European quality standards. Read more about Baths baths in another article.

"Villeroy & Boch" is one of the oldest French companies engaged in the manufacture of sanitary ware. They have been on the market since 1836.Almost two centuries of experience in production, of course, affects the quality of their products. Acrylic baths of this company attract a refined, original design and a long service life.

Polish company Kolo produces inexpensive acrylic bathtubs with good characteristics. The company boasts a wide range of models. The only negative - it is quite difficult to find a bath equipped with hydromassage. It should be noted that in the shops of our country acrylic baths of the company "Kolo" are rare.

In the last decade, the production of acrylic bathtubs has grown significantly, both in Russia and abroad. According to experts, in due course acrylic baths will gradually displace cast iron and steel products. So, in the past 2014 the leading place was occupied by cast-iron baths - they made up 47% of the bathtub market. However, for a year the production of such baths was reduced by 8%.In turn, the production of steel baths decreased by 13%, and the volume of manufactured acrylic products increased by 8%.

For convenience, we will provide information on prices for acrylic baths from leading manufacturers in the form of a table. The cheapest baths are the so-called "babies", 120 cm long, and the most expensive baths are designer baths of unusual shapes and sizes. For a standard bath, we took a single bath with a length of 170 cm. The prices are presented on average in Russia.

Thus, prices for acrylic baths range from a few thousand to several hundred thousand rubles. Standard single bath oval or rectangular shape, without hydromassage and other additional functions can be purchased for 10-30 thousand rubles. The product of good quality from leading Russian or European manufacturers is much higher.