How to break the wall in the apartment by yourself: obtaining permission from
Before proceeding directly to the demolition of the wall, it is necessary to go through several instances and obtain permission to redevelop. The first thing you need to invite an architect to him to consult about what walls can be demolished and helped to make a sketch. Already with a sketch made on the house plan, you can go to the BTI.If serious changes are initiated, the sketch can not be avoided. There is already need to contact the construction company to get a project for future redevelopment.
Next, already with the finished project or sketch you need to contact the Housing Inspectorate, which within 45 days will review the appeal and make a decision.
In case of a positive response from the Housing Inspectorate, you can proceed to work.
You need to act strictly on the submitted project or sketch, because at the end of the work, you will need to call a commission from the Inspection to check and issue the certificate.
Than to break a wall in apartment
When the permission is received, it is possible to pass to performance of works. But before this you need to take out and tightly cover with foil and tape all furniture and take care of the built-in communications, such as electrical wiring and water pipes running in the wall for demolition.
The first step is to determine which tool will be used to perform the work. Basically, they are performed using one of these tools:
- Bulgarian;
- Powerful punch;
- Demolition hammer.
Whatever tool was selected, work should begin with the marking of the wall. As in no case it is impossible to cut out the whole partition entirely. You need to do this in parts.
How to break the wall of the house with a jackhammer
This method is acceptable only if the apartment at the moment no one lives. This is due to the fact that when demolition of a concrete or brick partition with a jackhammer, a lot of dust is formed, which settles on all surfaces and penetrates through the smallest slits.
How to break a brick wall with a Bulgarian
To break a wall with a bulgarian, the tool needs to be equipped with a disk "on concrete".And then start, according to the predetermined markings, to cut pieces of material. The advantage of using such a tool will be a minimum of noise and accuracy. And the main drawback is a large amount of dust.
How to break a partition with a perforator
A perforator can be hammered, but can be cut. Chipping is a very effective method, but not the most accurate. In addition, using it in this way, you can accidentally touch something and take it off.
Cutting a concrete or brick partition with a perforator is the most suitable way of demolishing a wall in a habitable apartment. Since this is the least dusty method. To cut a septum with a perforator, it is necessary to drill through holes through the marking, and then use a hammer and a chisel to cut out the "cut out" parts.
Break the wall in the apartment: the cost of
After the work is completed you need to collect all the construction garbage in bags and take it out of the apartment.
If there is no desire to do all this on your own, you can call specialists who will do this work, but it will not cost too much. The average price for the demolition of one square meter of a concrete or brick partition is over 500 rubles. This figure can vary depending on the material from which the baffle and its thickness are made. Also, you will have to pay for the removal of construction debris.
