Finishing the loggia with your own hands

click fraud protection

Loggia is a small room, which, if desired, you can turn into the most cozy place to relax in your home. The main thing is to show imagination and patience. Fortunately, the variants of the logs available today are so different that you can easily find the best solution. What should I prefer?

Contents

  1. Finishing with plastic panels
    1. Finishing with clapboard
    2. Finishing with plasterboard
    3. Finishing of the loggia
    4. Video finishing the loggia with your own hands

Decorating with plastic panels

Special success for many years has been using the plastic panel .The advantages of such a material include its practicality and affordable cost. In order to cut plastic panels, you can use a simple cutter made from a piece of hacksaw blade under the ruler. Neighboring panels are attached to each other with the help of "spike-groove" locks, so such interior decoration of the loggia will not be difficult even for an inexperienced person. The number of pluses is also the lack of the need for special preparation of the premises. You just need to see the finish of the loggias,

photos of which we have posted in this article, and there will be no difficulties.

Finishing by lining

If you prefer more expensive and respectable options, pay attention to the finish of the ladders with the lining .In principle, the technology here is similar to the above. If you want to save a little, then choose substandard wood of class B or C. But be prepared to make a little more effort to give the room aesthetic appearance. Look at the finishing of the loggias, the video of which we offer, and you will cope with everything and your hands. Do not forget about the impregnation and, for example, varnishing, as the tree is a pretty capricious material.

Finishing plasterboard

If you are interested in inexpensive options that do not burn and have a good heat and sound insulation, then finishing the loggia with gypsum plasterboard is just what you need. After you install the wiring and waterproof the room, mount the frame from the galvanized profile along the entire perimeter of the walls. Mark and cut the layers of material and screw them to the frame using special screws. Next zashpaklyuchte all the joints between the sheets and for greater reliability, cover them with a serpent. After the putty dries, polish it and proceed, if desired, to additional decoration of the room with artificial stone, ceramic tiles, etc.

As you can see, materials for finishing the loggia are different. However, in any case, before you start work, you need to take care of creating a pleasant indoor climate. In other words, the finishing and warming of the loggia should be performed together and by all means. Remember that in winter time in such rooms it is colder, and in summer it is always hotter. The selected finishing materials must be resistant to condensation and sunlight. Both the glazing and the finishing of the loggias can be done by themselves, even if you have never done this kind of work. Our main advice is that you do not try to save on each material and tool. Use high-quality and modern products, and your loggia will become the most cozy and comfortable.

Photo of the loggia

Video decoration of the loggia with your own hands

instagram viewer