The closet cabinet is an excellent element of the interior of any room, moreover, it is multifunctional.
It takes up little space, compared to standard cabinets, while its capacity is much higher.
The only minus of any closet cabinet is its doors, which in due course should be adjusted.
How is the adjustment of the doors of the wardrobe?
It should be noted right away that conventionally the doors are divided into two types - roller and rail. More reliable, nevertheless, are considered roller, but they also have a number of drawbacks.
More details about filling the cabinets of the compartment can be found in this article.
Contents:
- Getting Started with Adjustment of
- doors Features of some
- models Important moments
Getting Started on Adjusting Doors
So, to adjust the door vertically, locate the bracket with the bolt near the bottom of the door( where the moving mechanisms are placed).
If you turn it counter-clockwise - the door will go up( one turn of the bolt will roughly raise the door by 1 millimeter).And vice versa - if you turn the bolt clockwise, the door will go down.
If, after closing the closet, the door is loosely pressed against the frame, then in addition you need to adjust the horizontal stroke of the door.
Next to the first bracket find the second( it is more often located on the vertical side wall below or in the middle).
Similarly, we twist the bolt and adjust the stroke of the door. Be sure to check after the end of the procedure whether the cabinet is opened / closed normally, does not bind anywhere, and so on.
Features of some
models Some models further adjust the doors of the compartment cabinet. For example, in the cabinets "STERH" still in the middle there is a sealing frame on which the lock is located.
There's also a bracket that adjusts the door's stroke back and forth.
Sometimes there are cabinets, where the adjustment is performed completely rails. That is, to select the height and clamp is necessary for the rail.
It's true that such models of cabinets have not been produced for a long time, so they are unlikely to meet you.
Video:
Important points
And do not forget that the placement of the door is also affected by the deterioration of the moving mechanism. At least two times a year it is necessary to completely sort out the rollers, lubricate them with machine oil or mechanical lubrication.
Otherwise - the mechanism will fail. And to replace it is very difficult, because spare parts are not easy to find.
To be sure that the adjustment was carried out correctly, just try to see if the door is moving back and forth.
If there is even the slightest play, which was not before adjustment, then look for your mistake and continue to regulate the mechanism.
