How to put a tile on a wooden floor

click fraud protection

Preparing for laying tiles on a wooden floor

In order to begin work on laying tiles on a wooden floor, you need to prepare a number of tools and materials:

  • Floor tile.
  • Cement solution.
  • Gvozdoder.
  • Screwdriver.
  • Mastic for repair work or beastilat.

How to put the tiles on the wooden floor: video, action plan

The work on laying the tiles on the wooden floor consists of several step-by-step activities:

  • Preparing the floor for work.
  • Removal of previously applied coatings.
  • Checking of wood coating materials for damage.
  • Laying of the mesh.
  • Preparation of solution for operation.
  • Laying tiles on the floor surface.

Visual work is demonstrated in the video instruction.

How to put the tile on a wooden floor.

Step 1: Preparing the floor for laying the ceramic tile

To ensure that the tile is laid correctly and permanently - the floor surface should be checked for irregularities and loose wooden elements. If it is impossible to bring the surface to a proper state, it is more appropriate to completely remove all the wooden elements and mount the cement screed. If the wooden cover is completely unusable, it will help to avoid tile damage in the future.

Step 1: Preparing the floor for laying ceramic tiles

Step 2: dismantle old coatings before laying

Before you start laying the tiles on a wooden surface, you must first clean it of previously applied paint and varnish. These actions can be performed in several ways: mechanically, by heat treatment, and also with the help of special fluids. The mechanical method involves removing the paint by scraping it off the wooden surface with various tools such as a spatula or chisel. Thermal method of removing paint from a wooden surface implies preheating the old paint with a mounting hair dryer, and then removing it with the same spatula or chisel. Liquid removal involves applying a special solvent that separates the paint from the surface, after which it can be removed using a variety of tools or even a rag.

Step 2: dismantle old coatings before laying

Step 3: check if the wooden floor is strong enough to lay the tile

Before laying the ceramic tiles, it is necessary to check the previously cleaned surface for various cracks and bumps. If such elements are found, it is necessary to eliminate them using a chisel( in case of bulges), or putty( in case of cracks).

Step 4: Reinforcing the floor

To keep the tile firmly on the floor surface, it is necessary to pre-lay a painting net on the wooden surface. Then the mesh is covered with a special primer, after which it needs to be allowed to dry thoroughly.

Step 4: Reinforcing the floor

Step 5: prepare glue for ceramic tiles

A solution for laying ceramic tiles on a wooden floor is made by mixing cement with bostilate or building mastic. This will ensure the best gluing of building materials from the floor surface.

Step 6: How to put the tiles on wooden floors

The tiles are laid on a pre-prepared surface in even rows, in accordance with a pre-prepared pattern.

Step 6: how to put the tiles on wooden floors

Thus, the article described and described measures for laying ceramic tiles on a wooden surface.

instagram viewer