Putty - operation that requires training
It is very important to perform painting works correctly during the repair process, it is up to them that the durability of the repairs is dependent on them. Professional finishers know that 8 of the 10 surfaces that require painting, must first be aligned.
Independent work with putty does not always give a positive result, the wall can be cleaned professionally by a professional who has already managed to "fill his hand" and can well see how much finishing material needs to be applied.
A large set of special tools can not only competently work with the composition, but also correctly prepare it. The fact is that the paste applied to the surface quickly freezes, may crumble or, on the contrary, be too liquid for work.
Experts advise to prepare the solution strictly in accordance with the instructions, however, if the result is an unsuitable consistency, add water or a dry mixture can be by eye.
Tools for puttying - we arm
One of the most useful tools for puttying is a mixer with a special long nozzle. The device allows you to instantly stir the mixture, remove all lumps. In other words, a mixer is a special building attachment for a drill, which should be in the arsenal of everyone who plans to do repairs.
A special set of spatulas will allow not only to apply the putty quickly to the surface, but also to remove excess. Professionals like to work with two different spatulas at once, separating the remainders and using them in the future.
Special brushes and rollers allow to moisten the wall with water or to apply a primer, which facilitates the grip of the material. The rule is another useful tool, suitable for working with a thick layer of putty, it is a kind of spatula for putty without a handle - a large rail that quickly separates unnecessary parts of the material and distributes them over the surface.
A set of skins of varying degrees of graininess - an addition that should be used after completion of work. As soon as the putty dries, it will need to be leveled. Stitching superfluous, as a result you will get a perfectly flat surface.
Features of the
tool When working with a drill, it is important to monitor the correct attachment of the nozzle, otherwise it may fly off, and the entire composition will be on the walls and on the floor. Work with a spatula should be carried out quickly, the composition does not suffer procrastination, it freezes in the air and forms lumps. Thus, having learned to work immediately with two spatulas, a person increases the speed of surface treatment.
Manual spatulas like those who know how to level the walls, work with the rule is easier, but a large mass of the composition can easily fall to the floor or move over the edge of the instrument. An interesting tool - a gun for puttying, it can come in handy if you want to create a 3D drawing of .Spraying the composition in a chaotic manner, you can get a real masterpiece.
As a rule, after solidification of the material, it is stained, thereby making the pattern on the surface even brighter. Practice shows that the skin is a tool, work with which begins after the drying of the putty - one of the most necessary elements. Stitching superfluous, you form the ideal pattern or, in case you need a flat surface, remove the jags and an extra layer.