Visor - purpose and function
If the visor is missing, then the balcony and everything that is on it, fall and make this place less functional. Many turn it into a mini greenhouse, then the canopy is a very important part. He covers flowers from direct sunlight, he also protects the window block. It's great if that plastic one, then nothing will happen to him. But if it is wooden, then the visor is simply necessary.
Different roofing materials can be used for this device. The main thing is that they are strong, durable and moisture resistant. So, you can take a profile sheet, slate or ondulin. These materials are strong enough and can withstand a layer of snow or icicles in winter. It is really possible to make a canopy from polycarbonate or plastic slate, but it will then be short-lived.
We choose the material for the visor
Profiled sheeting is a bent galvanized sheet. Also it can be with a polymer colored coating. This material has its advantages:
- resistance to corrosion;
- is not subject to mechanical influences;
- resistance to atmospheric precipitation;
- has a wide range of colors;
- quick installation;
- light weight.
Slate - asbestos-cement corrugated sheets in gray. But the color can be changed with water-dispersion paint. Has the following characteristics:
- high frost resistance;
- strength, withstands high loads;
- waterproof;
- low thermal conductivity;
- resistance to destructive influences;
- long service life;
- fire safety.
Ondulin is the so-called modern euroshire. In fact, these are bituminous corrugated sheets. Ondulin has several standard colors. It differs from the previous materials in the following properties:
- is durable;
- does not contain asbestos, which is harmful to health;
- resistance to different climatic conditions, from sun to frost;
- biological resistance to the effects of bacteria, microorganisms and fungus;
- low water absorption;
- little weight.
How to make a visor over a balcony -
action plan The installation of a visor on the balcony of the requires preparatory work and the appropriate tool. To do this, you will need drawing accessories, a canopy and carcass material, screws, a sealant, a drill, a welding machine. The surface on which the work will be done should be smooth and clean. On the day of installation, the weather must be dry, then there will be no moisture between the coating material and the surface. Then you can start working.
The first thing to do is determine the type of visor. If the balcony is single, it is better to close it from all sides. After the visor type is selected, we make measurements.
To ensure that the balcony is fully protected, the dimensions of the canopy should be wider by 30-40 cm. It is important that the measurements are taken accurately. This eliminates the risk of damage to the material.
Next, we advise you to make a drawing, which will show how to make a visor. Of course, you can do without it, but then you need to be extremely careful. Then proceed directly to the manufacture of the canopy and its frame.
The welded frame is mounted to the wall, fastened so that there are no gaps. Seal with sealant. If it was decided to make a closed canopy from all sides, then first sidewall, and joints are sealed.
Above lay the selected roofing sheets and fix the screws. In order not to regularly repair the visor of the balcony, all seams need to be properly sealed. Then it will not leak, and the balcony will be quality and permanently protected. The canopy will turn the balcony into a quiet and cozy place for rest and relaxation.
