We collect inventory for the works of
. The classical plinth is polyurethane, it has a smooth surface. Flexible polyurethane skirting allows framing radial and erker surfaces, rigid is used with stretch ceilings. The color of the product may vary from transparent white to deep black. When choosing, you need to take a piece of wallpaper with you and see how they fit together, and you need to choose under different lighting.
To begin to decide how to properly join the ceiling skirting, it is necessary with the preparation of material and tools. It is required to prepare a chair( a device for cutting at an angle), a hacksaw, a construction knife, glue and rags. Before installation, you need to calculate the yardage. To glue before or after the wallpaper, there is no fundamental difference, it all depends on the quality of the wallpaper.
The standard size of the product is usually 2 meters. We need to measure the perimeter of the room and divide it by 2, we get the number of pieces. For example, the perimeter of the room is 24 meters, divide by 2, we get 12 ceiling skirting boards. You need to buy with a stock, suddenly you have to cut something.
Customizing the ceiling molding yourself
How to adjust the ceiling skirting board? This is an important stage. The edge of the product is cut at an angle of 90 °, and the joint of the ceiling and the wall has an angle of 45 °, so it is impossible to join the edges beautifully without cutting. Glue follows from the corners, starting from the entrance. Parts of the wall and ceiling below it may be uneven, all of this will close. The surface needs to be swept away from the dust, so that the glue holds better. Further on the product we apply glue and firmly press against the wall, the separated drops of glue must be cleaned with a soft rag.
In order not to rack your brains, how to join the ceiling skirting, take a chair or a U-shaped box with slots located at different angles. The first skirting board is cut at an angle of 45 °.Cut should be so that the short side could lie to the ceiling, the long one - to the wall.
Burrs must be removed with a construction knife or sanded, then glued. The second plinth should be tried on, outline the junction and cut off with a construction or clerical knife so that it repeats the profile of the first, then the connection of the ceiling skirting will be ideal.
Direct mounting of skirting boards
The connection angles can be chosen different, depending on the configuration of the room, but the connection must be very carefully, the defects here are especially striking. After the corners are attached, even areas are glued, while the edges also need to be adjusted to 90 °, in production they could be cut off unevenly.
Before you connect the ceiling skirting, in the building shop you can look for special corners, designed specifically for this purpose. These products are simply pasted into a corner, there is no need for an accurate fit. Such corners are decorative in themselves, they have different shapes and fill the space between the straight edge of the plinth.
When connecting parts in the joint to the ceiling skirting, glue is added, the surplus is removed with a damp rag. After attachment, the formed slots should be filled and carefully leveled or filled with sealant. Subsequently, the plinth can be painted or kept in a factory view. If everything is done carefully, the room gets a complete look.
