Finishing fireplace from plasterboard with own hands

It's not so difficult to create a fireplace from plasterboard, but it's not everyone who makes it beautiful. Therefore, during the preparation of the project of the future product, it is worth choosing the material for decoration taking into account the size and design of the room. Do not forget about the size of the equipment, which will be mounted inward. If you have already envisaged everything, then the fireplace finish with your own hands will be easier, and the result will be better.

Step-by-step instruction for finishing the fireplace from the drywall

Before you begin the actual finishing process, the product should be prepared - plastered. After that, the walls will be smooth and smooth, the material will be better to lie down, and all joints will be perfectly hidden. To plaster the wall you need to do the following:

1. Make sure that the serpian is glued at all joints of the gypsum board frame.
2. Treat the surface with a primer using a roller.
3. Fill the putty in the bucket, add water according to the directions on the package and mix thoroughly until smooth, without lumps. The easiest way to do this is with the help of a special corolla, which is worn on a screwdriver.
4. Take two spatulas - large and smaller. Apply the finished mixture to a large small, evenly spreading the layer along the entire edge.
5. Begin applying the filler from top to bottom, stretching evenly.
6. Align the entire surface and apply a primer.

Now it remains to do the most important thing - decorate the fireplace with decorative elements. On our site there are a lot of ideas with which the finishing of the fireplace from plasterboard with their own hands will be simple and spectacular. Here are a few options, what materials can be applied and how to work with them. It is worth recalling that it is best to look at products, in which the upper shelf is combined with the foot of the fireplace.

1) Finishing with decorative plaster. This option is one of the simplest and most affordable, but do not forget to glue the perforated tape for strength. Doing the work will not be difficult, especially after you have leveled the walls themselves. If you chose decorative plaster "under bark beetle", for example, you will additionally need a Venetian trowel or a paint trowel. Apply from the lower right corner, covering not too large surface, as this type of plaster dries quickly. The field of how the layer is applied, wait at least 5 minutes and begin to rub, creating the desired pattern. Understand that the plaster has dried and it's time to start the grout in appearance - it ceases to shine.

2) Decorating with decorative stone. You can see how the finishing of the fireplace with your hands will look on the photo in this article. For gluing a stone, you can use cement mortar, gypsum mortar or liquid nails. The easiest way to work with the latter option, especially if the size of the stone is small. You can create a drawing yourself, but you need to start the work from the bottom.

Special angular stone elements are bought at the corners. Even though the stone is of different sizes, follow the step and level. If you work with solutions, make sure that they do not get on the front side of the stone. In case the material is soiled, wipe it immediately with a damp cloth. At the end of the job, cover the entire surface with a varnish to protect it, and also to reduce dust on it.

For more detailed study of the process of working with materials, as well as searching for other options for decorating the fireplace with your own hands, we have posted video materials on our website.

Video decoration of the fireplace with your own hands