Floor tiles for the hallway - the basic requirements of the
While you are walking down the street, a pebble stuck in the crocheted sole may not be noticeable, but it's worth taking a step on the smooth hard floor and you will immediately hear a characteristic grating sound. A non-high-strength surface will be immediately scratched, so the main criterion by which ceramic floor tiles for the hallway is selected is resistance to mechanical stress, along with class 3 wear resistance.
Ceramic flooring should correspond to the 4-5 class of abrasion from 5 possible.
But not always we go in boots with a rough sole, sometimes we also wear light shoes with almost smooth marks. Imagine that before entering the house they stepped into a puddle and, with such a wet sole, stepped onto the glossy tile. The result of falling is rarely predictable, but even with a favorable outcome in the lungs, there are few pleasant bruises. Therefore, the second factor to consider when buying a tile is a relief or rough surface.
Tile on the floor in the hallway - how to choose it?
In addition to the listed properties, tiles in the hallway should have a low level of moisture absorption. Entering the house in a wet clothes after rain, we sometimes cover the floor not just with splashes, but with whole pools of water. The smaller the porosity of the material from which the tiles are made to the floor in the hallway, the lower the absorption of moisture, ideally it should not exceed 3% in a private house and 6% in an apartment of a high-rise building .Given that in the hallway floors have to be washed especially often, it is desirable that the coating withstand the effects of household chemicals, and therefore it should be class A or AA.
The hardness level of the coating should correspond to 6 or even 7 points out of 10, not necessarily above, it will already be industrial flooring. Nevertheless, even with the maximum density of the material, it is advisable to place a special rubber mat near the entrance door, protecting it from excessive load. Decorative tiles in the hallway, being within the house, absolutely should not possess such quality, as frost resistance. If the front door is made and insulated according to all the rules, even those tiles that will be laid at the very threshold will not be exposed to low temperatures and, especially, to sharp changes in their levels.
Design of tiles in the hallway - what to prefer?
In very rare cases, the layout of an apartment or a private house provides the presence of windows in the hallway, so this room usually does not have a bright light. Therefore, it is extremely undesirable to use here a tile of dark colors, especially black, and small in size. It is best to design the tile in the hallway in light cool colors, so it becomes visually more spacious than the .If you apply warm colors, the room will seem smaller, but much more comfortable.
When in addition to ceramic flooring you will also need wall tiles for the hallway, it is better to choose artificial stone. The best option is a granite, they can be faced with walls and floors. For the latter, a choice can also be made in favor of a quartz vinyl coating, which is based on about 80% quartz sand bound in a strong and flexible tile with vinyl and plasticizers with the addition of pigments.
The most reliable and elegant is the so-called "Golden Tile", produced in South Korea. This material has nothing to do with noble metal. The tile consists of PVC, on top of which layers of natural stone-bound stone granules, fiberglass and the strongest film with a pattern are successively applied. And all this is only 3 millimeters thick.