Production of double-glazed windows on video is easy

Advantages of IGP

238-production-insulating glass-video-99563

The production of double-glazed windows in video shows how the actions take place in fact, in sequence and technology, but before that you need to make several decisions.

  1. Determination of raw material for flat glass. There are two types: standard - quartz sand and the original - glass fight.
  2. Furnace for raw materials. It differs depending on the temperature settings. Naturally, there are domestic and foreign producers. Where the first such companies are JSC "Steklomash"( Orel) or ZAO "Nakal"( Solnechnogorsk), and the second - JSC Cklopenliberic( Czech Republic) or from Cieffeforniindustriali( Italy).Also, needless to say, imported production have a high cost and maintenance costs. So, that salaries for the purchase of such devices should not be 1 or even 5 million rubles.

Production has such advantages:

Sheet glass is not as valuable as the finished product from it. As already mentioned, there are large enterprises that produce a large amount of glass. The price of entry of producers in the "club" from 150 million dollars or 114 million euros.

Often these manufacturers prepare double-glazed windows for individual windows manufacturing enterprises.

Types of production of double-glazed windows

Separated:

  1. A small enterprise - no more than 50 double-glazed windows per day.
  2. The average enterprise - no more than 500 double-glazed windows per day.
  3. Automated enterprise - no more than 1000 units.

Working Ingredients:

  • Glass Material
  • Frame
  • Absorbent
  • Sealant

238-production-insulating glass-video-1

Insulating Glass Technique and Related Conditions

Stages:

  1. Material preparation, which involves cutting glass and cleaning cut parts. Washing is done manually or automatically using detergents. The glass cleaning kit consists of:
    • Glass production section.
    • Feed the glass into the sink.
    • Semiautomatic assembly of double-glazed windows.
    • Service for acceptance of finished products.
    • Double glazing unit.
  2. Direct mounting. It involves cutting out the distance frame, applying the sealant to the frame and connecting it to the glass unit. Sealing is achieved by a two-time application of sealant. The second layer is applied to the end of the glass unit. This sealant can also act silicone. Apply with a thiokol extruder and hands. It is not necessary to use for this purpose adhesive tapes since it is proved that they retain moisture in the double-glazed window, and this is extremely detrimental to the operation of the window.
  3. Fixation. Occurs with a special one- or two-component sealant, which must be sealed by a connected double-glazed window and frame. It is also important to completely dry the entire product, therefore, a complete inspection of the insulating glass unit for dust, excessive quantity of sealant and continuity of the sealant layer is performed. For drying, often the glass unit is placed in a special box where the air circulates freely, ensuring drying.

And here's a video about how to build a production of double-glazed video.

Calculations for the

technique The cutting can be done on a semi-automatic table Mastercut-3.2, which is worth about 25-30 thousand euros. Also attached to this table is an employee. And in order to clean the glass, you need special equipment for cleaning water with a filter, which is estimated at 20-30 thousand euros, and a filter - 2-4 thousand euros. An employee is also required for the washing process.

Good luck in installing new plastic windows!

instagram viewer