Tint film for windows

Every year, people are paying more attention not only to the quality of the interior decoration, but also to how much the room will be protected from direct sunlight and possible cracks in the glass. In addition, most people tend to provide themselves with maximum comfort and rest, and without outside views. All this can be achieved by using a tint film for windows.

About

When talking about a tint film, it is meant that it will protect the windows as well as the other glass surface from bumps andsun rays. Also, if the glass is equipped with a film, it will be much stronger than the usual one.

Many fans of indoor plants are interested in whether the growth of plants will affect the film. Experiencing is not worth it, because on their growth it will not be reflected, unless, of course, to grow exotic plants that are very fond of light. And ordinary plants quickly adapt to the new mode of absorption of ultraviolet rays.

Quality film is characterized by the fact that its outer layer( there may be several of them) is able to withstand mechanical damage. To make the film stronger, when it is produced on a thin surface sprayed, consisting of the smallest particles of metal. The more such "metallized" layers, the stronger the film will be.

Each type of tint film consists of polyester. This material has increased strength, as well as good elasticity and the ability to transmit light.

The tint film for windows has several layers, their number depends on the functions of the protective material. Each film layer is connected with each other by means of a special device - a laminator.

To protect your windows from sunlight or the looks of passers-by, when attaching material, you need to use special glue. It can be different, depending on how long it takes to dry it. In addition to the adhesive, the film can be "planted" on the glass with the help of ordinary water.

It should be noted that when installing a tint film on the apartment windows, it is necessary to be extremely accurate and not to make mistakes. The film can be glued only once, because in the case of an error( jams or bubbles), it can not be removed simply by using a special liquid for removal.

Therefore, in order not to spoil the expensive material, and the tint film for windows has a high price - it is best to invite specialists to perform all the work on applying the material to the windows. In addition, it is worth noting that many manufacturers give a guarantee on their material, but on condition that the film will be installed by specially trained workers.

Advantages and types of the tint film

Pros of the tint film:

• regulates the brightness in the room;
• film is able to protect indoor plants from direct sunlight;
• furniture and curtains do not burn out.

A wide selection of films for window protection is on sale.

Consider each option:

1. Protective film with a tint effect. It is applied in cases where the task is to protect the glass from impact and protect the room from the smallest fragments. Often such a film is called anti-vandal. There is also a kind of protective film that protects against explosions. It is used in large rooms - in crowded places, cinemas, shopping and entertainment centers. For residential premises, it is possible to use a fireproof film that is capable of delaying the entry of smoke and fire into the room up to forty-five seconds.

Types of the tinted film, see photo:

1. Sun protection. Such a tint film differs from the protective one in that it has a unique property to hold up to ninety-nine percent of the sun's rays. It is desirable to install it in offices or offices. Coverage is able to protect the room from direct sunlight, which is very important when working with documents and a computer. Due to their properties, such a film will protect the interior and furniture of the living room from burning out. In addition, the advantages of a sunscreen are also that it can reduce the load on the air conditioner, because it protects the room from overheating during the summer and supercooling in the winter.
2. Mirror tint film. A kind of sunscreen film, has the effect of visibility from one side( mirror effect).Such a film will protect the living space from the curious looks of passers-by.
3. Decorative film. Such a tint film for windows is designed specifically for decorating windows. Designer film can be of different colors and shades, have a beautiful ornament and graphic design. Can be matte or transparent.
4. Architectural tint film for windows serves for decoration of building facades. It is applied to the outside of the window. It has increased strength, it can protect windows from impacts. It can be used to protect windows at any time of the year.

Of all the types of tint films for windows, one can single out the main advantage - the ability to protect windows from shocks and the spread of fragments in the room.

If you buy a tint film for windows in a special company, then its cost will include the installation.

Mirror tint film for windows

It has both the property of filtering infrared radiation and sunlight. When installing a mirror film, you can create a one-sided visibility effect when you see people, but you can not be seen.

Most mirror tint films have a protection against glare, which allows you to work freely on your computer or watch TV.

If the glass is exposed to impacts, the tint film will hold the glass in the frame and prevent it from shattering into the smallest pieces. If there is a question of protecting and imparting additional strength to glass, then it is necessary to install a shockproof film that will also have protection against ultraviolet rays.

In addition, the coating can prevent fogging of the glass, as well as reduce the convective flow directly in the room next to the windows.

The coating can be installed both on the inside and outside of the window. For installation from the outside of the room, special films have been developed which have a higher resistance to direct sunlight.

How to paste the film yourself

You can invite a specialist who quickly and qualitatively paste the film on the windows, and you can cope with the task yourself.

For preparation of the film, prepare such tools:

• scraper for washing windows. Choose a tool with a rubberized edge;
• scraper for cleaning windows - with a sharp edge;
• sharp construction knife;
• sprayer;
• wide rubber spatula to grab a large area of ​​glass;
• microfiber cut or cotton towel( without villi);
• detergent - suitable for children's liquid soap or shampoo.

What you need to know when working with film:

1. The temperature in the room should be at least five degrees and not more than forty. If the indicators are not met, the glue will either dry for a very long time, or, on the contrary, it will quickly seize.
2. The humidity in the room should not be more than eighty percent and not less than twenty.
3. Spray water in the room from the spray gun to keep the air moist.
4. The room should not be dusty, so wash the floors beforehand and dust off the furniture.

First you need to prepare the surface - wash the glass with a mild detergent. Using a scraper, clean all dust and dirt from the corners. If your window is wooden, then the glazing beads can be removed and cleaned.

Now you can proceed to the equally important moment - I will open the material. Take measurements and think about how you will cut the film. You should not have a lot of waste. If the width of the film is not enough to immediately cover the entire surface of the glass, then think about where the joint will be located. When cutting, leave the material on the allowances - from two to three millimeters.

How to install the film on the window:

1. Moisten the glass with purified water.
2. Take some soap or shampoo and treat the surface.
3. Place the workpiece on the floor or table and gently remove the protective layer. At this time, you must constantly irrigate the film with water from the spray gun.
4. Make sure that the film does not stick together, otherwise it will have to be thrown away.
5. Place the film on the glass, holding it by the ends. Please note that glass and protective material should be well moistened.
6. Fix the film at the top points and see its position. If you see a skew, it's not too late to fix it, because there is water under the film.
7. Use a spatula to gradually expel water from under the surface.
8. Leave it to dry completely. For this you will need one or two weeks. During this time, the film from the darker gradually acquires a lighter shade.
9. When air bubbles appear, you do not need anything - when the film dries, they disappear.
10. So that the spatula does not leave scratches on the surface, try to moisten it.

To look after tinted glasses it is easy - they should be wiped with a soft cloth soaked in soapy water. Do not wash the windows with brushes and abrasives, because they can leave scratches on the surface.