To date, vinyl wallpaper has gained an impressive popularity. In some countries of the world, they simply replaced many other popular types of wallpaper. There is no doubt that vinyl material has a number of positive features. This type of wallpaper is much more resistant to scratches than the known analogs. Also, vinyl material has a smart appearance. On sale you can find dozens of different drawings that do not compare with patterns on classic wallpaper. In fact, sticking vinyl material - a fairly simple process, but you need to know some of its features, without which the optimal result will not be achieved.

Features of vinyl wallpaper

It is necessary to know that the vinyl material is quite specific. When wet, such wallpaper is significantly stretched, and in the process of drying, vinyl begins to narrow severely. Thus, you need to closely monitor the process of gluing the wallpaper, so that eventually the strip of material is a single decorative component of the room.

You also need to seriously approach the choice of coloring material. Many people know that on the sale most often you can find bright and bright color compositions. Obviously, such options are not always suitable for a certain interior of the room.

Main Aspects of

Preparations Before starts, the vinyl wallpaper must be worn for a number of important points. Without them, the main process can go completely differently than planned.

At the very beginning, the purchased wallpaper is checked for defects. Unfortunately, buyers encounter this trouble very often. In some stores, sellers simply want to get rid of defective rolls. Even the differences in color compositions between wallpaper rolls can be considered a marriage. It is possible that the differences in color - it's just different compositions, but in this case the rolls will have different names and ciphers.

After unpacking, you need to study all the icons and notes on the liner with the information. It should be borne in mind that on all rolls the information must coincide. Also on the inserts will be indicated, as it is to glue the vinyl wallpaper of a particular brand, whether it is necessary to match the pattern when sticking. It is worth noting that to simplify the process of gluing it is better to use wallpaper that does not need docking. In this case, you do not need to select a picture to get a full composition.

Often people buy 2 different types of wallpaper, so that when sticking, alternate with different stripes. With a successful selection of material at the end, you get a really decent composition.

The insert must also contain information about the preparation of the wall surface. In some cases, there are special requirements, without observing which you can get an unexpected result.

Before sticking it is desirable to measure everything correctly, so as not to cut out individual pieces of wallpaper already during the process of finishing the walls.

For wallpaper wallpapering, a wallpaper spatula is useful, with which you can easily smooth out any irregularities and bubbles. It is worth saying that during the process it will take several times to use a wallpaper spatula, since air under the material can penetrate for about two hours while the wallpaper is still drying out.

It is important to understand that the room should be dry and warm, otherwise the wallpaper may become deformed when it dries. Also during the main process, extreme temperature changes should not be tolerated. Thus, it is necessary to control the optimal temperature, given that strong cold and heat will damage the vinyl material.

In addition, before the process of wallpapering, you need to turn off all electrical equipment. If you decide to remove all the sockets, you need to use the shield and turn off the electricity throughout the apartment.

The basic process of gluing vinyl wallpaper

begins the process of gluing the vinyl wallpaper from the corner of the room and is performed with an overlap on the adjacent wall( up to 5 mm).After that, the overlap can be removed with a clerical knife. If the sticker is a butt-end, it is necessary to start work from the corner, otherwise the desired result can not be achieved.

If you need to glue wallpaper on the ceiling, you need to start the process from the windows side. Also, this procedure involves working together, because one of the tasks that are set is too difficult to cope with. The first person is engaged in smoothing one part of the material, and the second holds the rest of the material with a squeegee.

To get a good quality wallpaper, care should be taken to ensure uniform application of the glue. To do this, place sheets of unwanted paper under the edge of the material. This will safely apply glue in any volume. If, for some reason, some corners of the wallpaper become unstuck, you just have to turn off a small part of the material and re-apply the glue.

The adhesive is applied evenly over the entire perimeter of the strip. After that, you need to fold the wallpaper in half. A third of the upper part of the strip is bent to the middle, just like the lower part. Within a few minutes the material should lie in this form. This will allow the wallpaper to be thoroughly impregnated with glue.

Next, the wallpaper unfolds and is applied to the wall. With the help of a wallpaper spatula, the entire strip is smoothed, from the middle and to the edges. Traces of glue are removed using a damp sponge. In order to get rid of the excess wallpaper at the joints, you can use a metal ruler and a clerical knife. Care must be taken not to cut off the necessary part of the material.

In case you need to paste curbs, you need to purchase a special glue. If the vinyl wallpaper is embossed, you can not paste curbs on them, so you need to create a small indentation during wallpapering.

In the event that, after smoothing a single strip of wallpaper a little on the other, you should once again smooth the strip, applying force to the side opposite the defect. With a high probability of joints between the bands will be ideal. After the glue has dried, the wallpaper will be a little narrower.