Installation of blinds on plastic windows

click fraud protection

The blinds are mounted independently on the plastic window taking into account the basic requirements: correct selection of the fixation point, proper marking and preparation of the brackets. Following the exact instructions, you can cope with work in less than 2 hours. For work you need: a set of blinds, a drill, bolts and dowels, a screwdriver, a hammer, a tape measure, a construction pencil, a level.

Contents

  1. Shutter installation options for plastic windows
  2. Step-by-step installation instructions for blinds
  3. Useful advices
  4. Video

Shutter installation options for plastic windows

The blinds are installed according to the window design features. If there is a projection from the frame to the wall, fix the product directly on the wall.

The absence of a projection will cause the blinds to be mounted on special brackets above the frame.

Another installation option is a direct attachment to each window leaf. In this case, the fixation can be made using small brackets or PVC brackets.

Any installation of blinds on plastic windows begins after marking, which makes it possible to open the window without problems. Therefore, the distance from the frame to the blinds should be at least 10 cm, but not more than 20 cm. Mini-blinds on PVC brackets are mounted without taking into account the indents.

Step-by-step installation instructions for blinds

To understand how to install blinds on windows with your own hands, you need to consider their placement. For example, when using PVC braces, you can do without drilling the frame. This solution allows you to accurately attach products with minimal time.

When the installation is carried out using brackets( for large blinds), work is carried out according to the following scheme:

1. A distance of 10 cm is noted above the wall or frame where blinds will be installed. When marking, the level should be used, which will prevent uneven installation of elements.

2. Above the line, the fixing points of the brackets are determined according to the width of the upper eave.

3. On the holes in the brackets there are places for the preparation of holes for the dowels.

4. On the marked points, the wall is drilled and the dowels are installed.

5. Brackets are fixed on the wall, they install the upper cornice and assembled according to the instructions from the set of blinds.

6. Insert the control knob into the hook of the swivel mechanism located on the top cornice( actual for the design with cord and handle).

7. It checks the correctness of the installation and the ease of opening the window when the blinds are fully folded.

In addition to this instruction, the video attached to the article will also be additionally familiarized with the details of the installation. Expert hints and an accurate description of each step will allow you to do the job without errors.

Useful tips

To understand how to hang blinds on the windows will help and turn-based photo reports of specialists. They will allow you to understand how to choose the right place and prepare it for mounting the product. Equally useful are the manufacturer's recommendations specified in the instructions accompanying the kit. Detailed study of them will help to avoid problems in the use of blinds and maximize their lifespan.

With the independent mounting of horizontal blinds, you must also purchase a special cutter.

It will allow you to carefully remove the protruding parts. The main advantage of the auxiliary tool is the rounding off of the cut edges.

Quality installation of blinds on windows with the help of PVC brackets is made only for mini analogues. They completely close the window, and do not interfere with its dense contiguity to the frame. Such products allow simple arrangement of any premises: bedrooms, halls, offices and offices. Work with similar models takes no more than 1 hour. The assembly rules are included in the kit.

Video

instagram viewer