Dishwasher: setting their own hands

Modern kitchen is hard to imagine without a dishwasher. Using the machine saves time and effort. It needs two events that were ready to use the dishwasher: installation and connection. Before you begin, you need to identify a suitable location, as well as take into account the many small nuances, without which it is competent to carry out the work will not work.

Features dishwasher installation, depending on the type of

There are several options to fulfill the harmonious integration of the dishwasher in the kitchen furniture. Most often, a dishwasher (PMM) is established at the place that was pre-selected for her. All devices of this type are classified according to their size into three types:

• compact;
• narrow;
• full-length.

Aggregates which belong to the first group, contain a small number of place settings (up to 5). They are often installed under the sink. Sometimes these models are located above the tabletop. The width of these models is 60 cm. They are great for people who live alone. Setting dishwashers of this type was not extremely difficult. This model can also be positioned in the cabinet above the sink.

Narrow PMM are so called because of its width, which is 45 cm. Such models are more spacious as the rest of the dimensions are similar to full-size cars. The number of sets that can be loaded into such a device, varies from 6 to 10. Skinny models are divided into fully and partially integrated. Their installation is done in the kitchen, the door of which serve as fronts. They may have the dimensions 45 and 60 cm. Facade dishwasher is best purchased separately.

Full-size units have a width of 65 cm and a height of 90 cm. They have the biggest capacity among all types of MMP. Devices can be integrable or installed separately from the headset.

Note! The presence of a prescribed schema describing the installation of dishwashers, greatly simplifies the task. Drawing can be prepared for a particular model, such as for installing Bosch dishwashing machine (or any other brand).

Most often, companies engaged in production of kitchen furniture, provide a special place in which to settle the future of the device for washing dishes. For manufacturers this taking as a basis the narrow dimensions of the unit and is added to the data values ​​of 5 or 10 cm (each side). If the kitchen furniture does not imply the installation of PMM, then it is best to purchase a detached device.

When you select a free-standing models it is very important to understand one thing: the appearance of the enclosure must be in harmony with the design of the kitchen facilities. If this rule is for one reason or another failed, then you should choose the place for installation in the immediate vicinity of the sink. be sure to carefully read the instructions before starting work, indicating how to install the dishwasher. Bosch - the best choice, allowing a minimum of effort to carry out the integration.

The distance from the dishwashing machine body to the back wall should be not less than 5 cm. This is a very important point, failure of which will result in the output of the machine out of order, since there will be no good ventilation.

How do I install the dishwasher: site selection

Before you begin the installation of the dishwashing machine, it is necessary to determine the place in which it will be located. It is worth considering a few important points. The easiest way to pick a place for models that are integrated into the kitchen. Such devices often are mounted in furniture units, which belong to the first level (floor-standing enclosures). Under the dishwasher should be allocated to the zone, which has a small supply of places.

Compact model if desired, can be incorporated into such a place, to which will be most convenient to get to. They can be placed at chest level in a furniture set. Errors in the selection of MMP location often lead to difficulties in operation and maintenance, so you first need to make a start on the type and characteristics of a particular dishwashers device. It will integrate it into the kitchen the most harmonious ensemble.

Note!Chinese models may have design features that affect the integration process. For example, some dishwashers "Medea" equipped with special adjustment screws, which are responsible for the degree of stretch of the facade.

The most suitable place to install the dishwashing machine is a module, located next to the sink. It is quite logical, since in this area concentrates all the water and sewer components that are needed to connect the PMM. By selecting this place, problems with connecting hoses to all necessary communications will not occur.

It is best suited for rapid integration model of the foreign producers (for example, Electrolux). Installing the dishwasher is often accompanied by a variety of small failures. It is much more likely to have problems if you need to pick a place for the dishwashing machine at the ready headset. In this situation there is only one - to adjust the size of furniture to size of the device. If you do not succeed, then it is necessary to carry out the dismantling of the individual modules of the kitchen ensemble.

Thus, the most important rule - in advance to find a suitable place in which to place dishwasher unit. This rule applies not only to dishwashers, but also other kitchen appliances. Sketch of kitchen furniture must be drawn up in the second turn.

Installing the Integrated dishwasher: training tools and materials

Most manufacturers engaged in production of dishwashers devices supplied with the unit's instructions. In these guidelines may specify what tools and materials required for the integration of a dishwasher in a kitchen ensemble. However, this statement is not always attached. Before you begin, you need to prepare the following tools:

• electric drill;
• screwdriver;
• Screwdriver Set;
• chisel;
• conventional hammer;
• pliers;
• level.

Instead of a drill to install the dishwasher with your hands can be used punch. Screwdrivers should prepare not only with flat caps, but with cross. Normal level used in this work is quite inconvenient. Experts recommend use a laser, if possible. Also need to prepare some auxiliary tools: pencil, measuring tape and building square.

Helpful information! Setting the dishwashing machine in furniture - this is one of the stages of its integration. If you want to connect to utilities PMM, the tool list requires a supplement.

The details that are used to connect the device should not be used, since their reliability is significantly less than the new ones. Especially do not recommend that you use / used parts during installation Bosch dishwashers. Own hands to carry out all the steps of installation and connection is problematic, so it is recommended to explore photos and videos related to this issue.

Terms of installation of the dishwasher and some useful tips

Before you buy and install a dishwasher, we must measure the place that was pre-selected for her. Checking is performed using a construction of the roulette. Even more correct decision - to measure before the acquisition of the unit. How to know the size of the MMP? Typically, the dimensions of the products are indicated on the websites of manufacturers and companies involved in their implementation. If the recess exceeds the size dimensions dishwashing device, it is possible to adjust the height of the device by means of legs.

It is important to remember that some models PMM is highly sensitive to the angles of inclination. Even the slightest angle (2 degrees) of such dishwashers may experience interruptions in operation. This category includes products of Hotpoint Ariston, and a dishwasher "Indesit". The Regulations annexed to it, required reading, because it contains many important nuances, including those relating to installation.

Before proceeding to the integration of devices, it is recommended to position under the worktop metal plate. Such a measure is necessary to protect wood material from the vapor. Devices that are fully integrated into the furniture, most often have in their kit a plate, but it is easy to make their own.

Countertop can install a compact dishwasher. One of the best devices of this type are models manufactured by "Siemens". Installing the dishwasher of this type is very easy, due to its size.

Complete the majority of dishwashers units attached special parts, which are used for attaching the door. To carry out the installation properly, it is recommended to check the preliminary calculations, wiring diagram and other details repeatedly.

The optimum size for the installation of dishwashers

The largest percentage of dishwashers have a width of 60 cm. These devices allow you to cover the needs of any family. There are narrow models, suitable for embedding, a width of 45 cm. It is said that the device, having a width of 448 mm and have a good functionality, not much different from the standard models.

Height of narrow dishwashing units ranges from 815 to 875 mm. These values ​​are taken by chance - they are selected in accordance with a standard height pedestals that are part of the kitchen units. In drawing up the dishwasher installation scheme should take into account not only its size, but also a small margin, which should have a niche.

Note! In that case, if the kitchen furniture was custom made, you should be careful. Standardized devices may not be suitable for such a headset. It is recommended to perform the measurements of niches and compare them to the dimensions of the device.

The easiest way to integrate a built-in dishwasher 45 cm. Installation of these devices is carried out in a matter of hours. Depth dishwashing machines usually is 55 cm. On sale you can find models that differ in height and depth. On dimensions should pay attention to the acquisition of PMM.

How to build the dishwasher in the kitchen: the integration of the closet

Cupboard, located next to the sink should have a width greater than 45 cm. In such a situation it is not necessary to invent sophisticated installation schemes should just perform installation in a nearby unit. When buying products of certain brands should be aware that they require the installation of special siphon when connected (eg, "Electrolux" device). Video installation of the dishwasher of this type can be easily found on the Internet.

To prepare the lower cabinet to be installed will need to do some manipulation. The first step is to remove from the pedestals transverse partitions (shelves), and to dismantle the rear wall. The bottom panel is removed only when necessary, eg if there is insufficient height of the module for dishwasher position. To carry out the fixation body, it is required to place strictly in the vertical plane. To do this, use the adjustable feet and the building level.

If desired, you can call a specialist, who will do the job professionally. However, it will be accompanied by additional costs. Price setting dishwasher depends on multiple factors: model, location, technical difficulties, etc...

Do not forget about the front panel, which performs a decorative function and contributes to the harmonious integration of the device in the dishwasher kitchen. The facade is usually carried out from the cupboard door. However, it can be purchased separately (optional). Devices that belong to the group partially integrable not require the presence of a decorative front panel.

Setting the dishwashing machine in a separate module

Sometimes there are situations when it is impossible to allocate space to the installation of new kitchen appliances. In this case, you can place your order of a separate module, which will complement the already existing kitchen ensemble. However, the rules relating to its location, the same. I need to have it placed in close proximity to water and sanitation.

Related article:

Built-in Dishwasher: modern technology for a comfortable life

Variety of models by the method of installation and dimensions. The functionality of the compact device. Manufacturers and prices.

Thus, it is possible to move into a new module technique, which is located above the sink, and integrated into the old dishwasher unit. In this case, all will depend on the installation characteristics. Built-in dishwashers need to align and fix. This is required to ensure that the device does not produce vibrations during operation. If you ignore the fixation of the MMP, then it will be very noisy and moving locker.

Helpful information! Hoses, located behind in the space between the rear wall of the dishwasher body and the wall must extend parallel to the surfaces. Access to them is required to be free, to avoid problems in case of need to perform the replacement of the failed item.

When you connect certain models it is necessary to read the instructions carefully. Dishwashers Bosch, as well as other devices of popular brands sometimes quite difficult to integrate into the old set. It was not necessary to change the furniture, you need to consider "Compatibility" on the stage of selection of MMP.

If the unit is under common kitchen countertop maintenance is complicated. The problem with communications that occurred in this situation, would require the dismantling of the dishwashing machine.

What to do if the incorporation is inappropriate

Some of the kitchen sets do not provide for the possibility of installing the dishwashing machine. In addition to the furniture may simply not be an empty seat. What to do in this case? In such a situation it is best to purchase a detached model.

Sewing machines of this type do not require complex integration work, so this option is perfect for people who do not want to mess around for a long time with the installation. There are three ways for location detached devices:

• on the floor;
• in a niche;
• on the countertop.

The best models that are installed separately, are manufactured by companies "Bosch" and "Electrolux". Installing the dishwasher of this type will not cause too much difficulty. In this case, all of the work is reduced, as a rule, only to be connected to the mains and other utilities.

You can completely redo some of the modules that make up the kitchen ensemble. Transfer of communications is also possible, but it is quite time-consuming work. Typically, this option is selected in the last instance, when you want to integrate the freestanding model and set on its front side a decorative facade.

How to build the dishwasher: checking packaging and unpacking

Preparation for the installation of the dishwashing machine includes two more stages, in addition to the choice of place: unpacking and scanning equipment. Decompression is recommended in the presence of the company's employees, whose unit was purchased. It is necessary to check the availability of all necessary mounting parts. If there is a problem with a complete set, then be sure to inform the employees of the firm.

Note! Check the need and the availability of instructions (required in Russian). Without it, much more difficult to figure the design features of a particular model.

If necessary, you can try to find the installation instructions on the website. Many famous brands are added to them in the description of the goods (for example, Bosch). Instructions for dishwashers are very important, so do not ignore this point.

In addition to the dishwasher appliance, a set often includes the details that are required for proper installation of decorative overlays. Also, be sure to check the presence of latching elements, rubber flap, used for protection, and pads with hoses. Recent need to connect the device.

Dishwasher: Installation built-in model

Before you begin to integrate the embedded model headsets, it is necessary to make sure once again that the cabinet has suitable dimensions. Its walls will need to perform the opening through which will pass the hoses that connect the device with communications. Installation is carried out in stages. Consider this process by the example of Bosch dishwasher. Setting the built-in model requires care.

So, the first installation of PMM integrable step involves its location in front of the niche that has been chosen to host device. Then you will need to stretch hoses, responsible for the supply and removal of water through the holes. It is necessary to make sure that the length of the hose fitting. If necessary, they will need to extend.

The next stage of "Bosch" dishwasher (or any other) requires the use of instructions. It needs to paste a special film to the inside of the countertop. It protects the wood material from moisture. Then you need to fix on the edges of the tape required for sealing.

Further installs the mounting plate and special damping elements. The latter are used for vibration damping dishwashing machine. At the next stage the leg height adjustment. The housing unit must be positioned vertically. After that is checked with a tape a distance from the walls to the recess edges Appl.

Note! dishwashers sets often include soundproofing material. It is fixed at the bottom of the niche. Without a sound-proof material unit is too loud noise during operation.

The next phase - installation of decorative elements. Pads can be made to order or make your own from a case of facial parts. To make a decorative facade, it is necessary to adjust the door in size. It is recommended to study the corresponding video. Installing the Integrated dishwasher comes to an end. Fixing linings made using self-tapping screws, which often come bundled with other auxiliary elements. After installation, the front part of the PMM and the connection is a test run.

How to install Integrated dishwasher: alteration locker

When integrated dishwashing unit in a locker you need to understand exactly how this procedure should be carried out. We consider in detail the sequence of actions that allow to install MMP in one of the lower compartments furniture set. At the beginning of the locker you want to remove the bottom shelf, then dismantle facial plinth.

You can then remove the door. It is important to understand that the stay should the wall, the back panel, as well as the upper part. To get acquainted with the process of integration will allow the video "Installing the dishwasher Bosch». The instructions that are given to it, greatly simplifying the work.

All dishwashers have the ability to commit to a countertop and wall, located on the sides. However, each manufacturer makes the individual latching elements, so universal recommendations in this regard does not exist. It must be based on the specific model.

Particular attention should be paid to ways of fixing domestic models (for example, "Hephaestus"). Dishwashers tend to good build quality, but their integration into the locker various problems may occur due to design features. fastening methods are also dependent on the type of furniture.

Dishwashing machine, usually fixed to the cabinet walls by the polymer liners. Their number is usually equal to 4 units. They should be placed on both sides (top and bottom). Dish-washing machine, installed in this way, not only has good stability, but also produces less vibration.

Some models do not provide for the use of such a large number of polymeric shells. As an example, some devices company "Electrolux". Setting this type of embedded dishwashers is performed using only two inserts which are arranged at the top of the cabinet (under the sink).

Consideration should be given another common situation. In that case, if the kitchen worktop solid, made a complete dismantling of the cabinet. Thus, the device is placed between the two walls. Bottom panel in this situation is not mandatory, but dismantled at will.

How to install the facade on the dishwasher: the details of the process

The front part of the integrable devices necessarily closed by the panel, which is often made by prior arrangement. It must exactly match the design of the room. In order to carry out the installation of such a panel, complete a specific PMM is the locking member, as well as mold.

Note! For installation on the facade of the dishwasher you need to take a paper layout. It marked all the areas as well as places where the clamps will be installed. This sheet is applied to the front door, and it is made markup decorative element. All the necessary areas can be noted by a conventional sewing.

Next you need to remove the paper layout and perform drilling holes for the screws. Where needed set tabs, as well as the front door handle. This manual is suitable for the installation of facades for dishwashers 45 cm, and for the installation of larger frontal parts.

After assembling the panel, you can begin installing it. You will need to fix a decorative element on the doors of the dishwashing machine and insert it pre-prepared screws.

Installing the Integrated dishwasher with their hands: protecting countertops

All dishwashing devices have a structural feature that leads to deterioration during operation countertop Appl. Dishwashers emit steam and moisture that rise and affect the countertop. This occurs when the door is opened.

In order to protect the countertop, you will need to install a vapor barrier and moisture. For this purpose there are various materials such as a film, plastic, metal sheets. In order to protect the tabletop from moisture, you can use adhesive tape.

Machines, which are produced by "Bosch", staffed by special plates made of metal. Find out what you must do the mounting plate, the installation instructions will help Bosch dishwasher.

Production of other well-known brands may also be staffed with plastic or metal plates, but the film is more common. It is glued to the bottom of countertops. After the installation of the protective material to Install the side gaskets and height adjustment of the machine.

How to build the dishwasher: what do you need to provide

In the kitchen, a special niche prepared to integrate other appliances (oven, microwave, and so on. N.) It can be located. It can be used to set the Appl. But in a small niche will fit only compact device that is worth considering when it is selected. If the furniture has a free cavity, it is far from the sewerage and water supply, then you will need to prepare the flexible hoses to connect.

Integrated into the kitchen and can be combined units of equipment. For example, a very popular plate with dishwashers. They are quite easy to install in a modern suite, but when installed in the old kitchen furniture can cause problems.

What other aspects of the installation should be provided? At the stage of integration is necessary to ground the dishwashing machine. There is also a rule that prohibits post PMM in the immediate vicinity of the hob. If the kitchen quite a lot of expensive equipment, then experts recommend to take care of the installation of the stabilizer.

Helpful information! Do not forget about the need for a manual installation of the dishwasher. Bosch, Electrolux and other large firms describe in detail all the nuances of the installation and use of the equipment.

The unit, which has adjustable feet, it is recommended to install so that it extends to the end. It is advisable to connect the dishwasher devices to an electrical outlet mounted separately, since the power of this device is quite high.

Installing the dishwasher in Kitchen Cooking: how to carry out a test launch of the device

Check the operation of the dishwashing machine - a very important point, because it allows you to determine whether the installation has been performed correctly. To use this test, you must run the PMM. Trial run carried out without loading dishes into the equipment. However, it will be placed in the detergent unit. Water softener, you can add a small amount of salt.

Photo assembly steps are recommended for viewing, because with them you can analyze in detail a step by step process of installing the dishwasher. Video on this subject also allow us to understand all the intricacies of the operation.

Leave the unit during the trial run is not recommended. Otherwise, one can not notice the various problems associated with the electronics, supply of water and its removal. Check PMM work also provides an opportunity to evaluate the performance of the filters.

If the test results show that the dishwasher is working properly, it means that its installation was carried out correctly and the machine is ready for operation. Experts nevertheless recommend some time to control the operation of the device, as connection problems may not be immediately apparent.

Integration dishwashing unit in the kitchen furniture - a complicated process, but with the proper training of the unit can be set independently. Before you get started, it is necessary to examine not only the installation of the technology, but also a statement that comes complete with a dishwasher. For more photos and videos also contribute to the proper installation.