Particleboard: the size and thickness of the sheet, the price of products of leading manufacturers

A huge range of DSP allows you to choose the material for various types of construction works, ranging from furniture and ending with the installation of floor and wall claddings. The type and size of the material should be selected depending on the condition and use of space. The main points to be considered when selecting CPD: the dimensions and thickness of the sheet, the price and technical characteristics of the material. A closer look at them in this article.

The popularity is due to CPD

Chipboard is recognized as one of the most popular and sought-after construction materials. Without it, a reliable and low-cost product is not costing the furniture industry, construction of new facilities, repair work, finishing and decorative activities.

Thanks to modern technology improved, manufacturers manage to bring your final product to high technical and aesthetic performance. The output is a smooth and high-quality surface of the sheet, which has high rigidity and strength. The ability to select the desired format of the sheet thickness and an attractive aesthetic appearance allows widely use the material for the manufacture of furniture, installation of partitions, floors, wall panels, and headliner wall surfaces.

material properties

The thickness of the product affects the strength of the material and its ability to resist external loads. The thicker chipboard, the higher its resistance to deformation, but the rate is inversely proportional to flexibility. Therefore, thick sheets under the influence of mechanical stress will break rather than bend a thin, on the contrary, will bend the plate without damage.

Plate thickness also affects the strength of the product. If strike at Heavy plates, on the surface may remain only minor dents and a thin sheet will break through.

Applications Particleboard

To mount the decorative partitions and producing low-loaded furniture elements used plate thickness of 8-10 mm.

Different size sheet chipboard 16 mm and 18 mm thick can be used for floor mounting, as a base for laying laminate or linoleum. If required to receive more wear-resistant floor covering, then it is necessary to use a plate 20 mm thick.

Standard sizes chipboard sheet thickness of 22 mm and 25 provide a solid base for the manufacture of kitchen tables, thicker windows, the most loaded furniture elements.

Most thick slab thickness of 28-38 mm are indispensable to make durable shelves and kitchen worktops.

Useful advice!bar counters operate exactly chipboard maximum thickness, since the final product is subjected to high loads.

Before you buy chipboard sheets, it is necessary to define clearly their number, considering the most appropriate size of the plates. To perform any work on the use of plates pre-measure is all linear dimensions of the working surface. From the obtained values, and the areas portions can find the dimensions of the sheets that will ensure a minimum balance material.

Frequently the effective surface may be considerably smaller than the dimensions of the sheet. In this case, you can resort to the construction of shops, where there is a lot of waste plates. CPD specialists will cut the size of the customer to the best of their material remains. In this case, the buyer will pay the cost, not only pieces of particle board from the total price of the sheet, but also services sawing material. However, the price will be lower compared to the cost of the whole plate.

For example, a price per sheet of chipboard 16 mm thick and 910 mm is 2800h2070 rub. RUB 157 respectively. per sq.m. And if you buy half a sheet taking into account the cut, the payment amount will be about 650 rubles.

Particleboard: the dimensions and thickness of the sheet material price

Regulations which regulate the geometrical dimensions chipboard sheet 18 gradations determined by the length and width 9. sheet length is in the range 1830-5680 mm, width starts with 1220 and reaches 2500 mm.

Useful advice!Chipboard sheet size (width and length) 2440h1830, 2620h1830 2750h1830 mm and most often found on the market, thanks to the easy handling and convenient transportation.

Chipboard sheets of standard sizes can be different in thickness. This important geometrical parameter is also in wide range. The minimum thickness of chipboard is 8 mm maximum - 38 mm. The most popular are particleboard thickness of 22, 18, and 16 mm. This indicator should be considered when choosing the material. It determines the continued use of the product and affects its level of strength during subsequent transportation. The thicker the sheet, so it is more durable and hence can be used in loaded constructions.

Dimensional table of the most common chipboard:

Plate Thickness	Plate length, mm	Plate Width, mm
10	2750	1830
16	2750	1830
2440	1830
3500	1750
18	2750	1830
2440	1830
2800	2070
22	2440	1830
25	2800	1830
28	3050	1830

Dimensions chipboard and sheet price

The formation of the cost of any material affected by several factors. The first is the product manufacturing technology (quality of raw materials, the presence of additional components, application of protective and decorative coatings). Further criteria may be mentioned the size and thickness of the sheet, on which depends the amount of feedstock. Also important to consider is the season which brings about changes in the pricing policy. The next factor - the place the product manufacture, on which the transport component of the price of the product. In addition, prices in DIY stores different cities may differ materially.

Depending on the variety, brand, and surface material, the cost per sheet of chipboard can start from 650 rubles.

Price laminated chipboard sheet size and 2800h2070h16 mm thickness will be about 1420 rubles. While sanded chipboard the same size would cost 880 rubles. This difference is justified by the costs associated with the technology of applying a certain texture to the surface of the plate.

Comparative characteristics of the prices for most running positions DSP is presented in the following table:

Identification of the substance	Geometric dimensions	Thickness, mm	Price, rub. / M²
Particleboard	2440h1830	16	135
22	160
chipboard white	2800h2070	18	252
22	312
chipboard color	2800h2070	16	259
18	287
22	325
chipboard decking	1830h600	12	291
2440h600	22	465
Laminated chipboard decking	1200h900	16	611

As the table shows, the material has a very reasonable price per sheet. Buy chipboard available in any hardware store, or place your order on specialized Internet resources.

Particleboard leading manufacturers are:

1. «Kronospan» The plant, which is located in Yegoryevsk. It offers high-quality material, which is produced on computerized nepreryvnorabotayuschem latest German equipment. The plant produces chipboard 2440h1830 size, and 2620h2070 2800h2070 mm thick sheets 10, 12, 16, 18 and 22 mm. It is possible to arrange individual order for sheets with a thickness of 8, 25, 28, 32 and 38 mm.
2. Company «Egger», whose products are manufactured under EUROSPAN trademark and is used for the manufacture of furniture parts and repair work. The material has a solid middle layer and thin outer, making it most suitable for the application of different decorative textures. The company produces plates in length 5600 and 2800 mm and a width of 2070 mm.

Laminated chipboard: product price

Nowadays, almost all cabinet furniture made of laminated chipboard, size which defines the standard. They should be considered when choosing the material for further cutting elements necessary in each case to receive a minimum amount of waste.

This material has a huge amount of texture and color variation. He is easy to work.

Important is the fact that it is not necessary to saw chipboard Portions of at home. Since during sawing slabs on conventional machine in places propyl laminate is split, which facilitates the formation of ragged edges of the articles. Therefore, the cut should be made of chipboard in furniture factories or construction departments that provide such services. You can also order individual items edging. All work carried out on the specialized equipment that allows for exceptional quality of the finished product.

Buy laminated chipboard can be based on the pricing policy of manufacturing companies, taking into account developments in technology, the possibility of production equipment and quality of raw materials.

Prices for laminated wood sheet size 2800h2070 mm of different thickness and type «Kronospan» manufacturer are presented in the table:

Identification of the substance	Thickness, mm	Price, rub. / Pcs.
chipboard white	16	1420
22	1800
chipboard color	16	1630
18	1660
22	2012
Chipboard on wood	16	1345
18	1520
22	1870

Leading manufacturers of chipboard

All known manufacturers produce material of rectangular shape, wherein different sizes vary chipboard laminated sheet. Such an abundance of different formats allows Furniturer select the desired size for a particular product to provide the minimum number of off-cuts and waste.

Next, consider the leading manufacturers of laminated chipboard.

brand Kronospan is the leader among other world-class companies for the production of laminated chipboard. Material manufacturer produces two lengths and widths of different product thickness. Dimensions are laminated chipboard sheet length 2800 and 2620 mm and a width of 1830 and 2070 mm. The thickness of the product begins with the 8 and extends up to 28 mm. Thin sheets are used for filling the frame MDF facades, sliding doors in wardrobes, for furniture elements, which are subjected to slight stress.

The company Egger It manufactures laminated chipboard standard size 2800h2070 mm thickness with various embodiments. But, in contrast to its competitors, a manufacturer other than plates with a thickness of 10, 16, 18 and 25 mm produces sheets of 19 mm thick.

The company SwissPan - one of the leading manufacturers of chipboard in the world. It produces chipboard following formats: 2750h1830h10, 2440h1830h16, 2750h1830h16, 2440h1830h18, 2750h1830h18, 2440h1830h22 and 2440h1830h25 mm. For manufacturing wardrobes and wardrobe used chipboard sheets with a thickness of 16 and 18 mm. Plates of thickness 22 mm and 25 mm are ideal for kitchen tops and other furniture component parts that are exposed to significant loads.

"Nevsky laminate» Plant It offers a unique wide range of materials for the manufacture of furniture. The company constantly monitors the global trends and provides its customers with the most relevant and expressive textures and decors. The plant produces laminated chipboard size 2440h1830 mm and a sheet thickness of 8, 10, 16 and 22 mm.

The company Swiss Krono Group one of the largest manufacturers in the world in the creation of wood-based panels. The manufacturer offers a quality product with a great variety of decors. Chipboard company produces two sizes: 2500h1850 and 2800h2070 mm thick sheets with a possible 10, 16 and 22 mm.

Related article:

Today, building market is rich in a variety of sawdust products. The material gained its popularity due to the different formats of products, a wide range of textures and color palette, versatility, relatively low cost of the product. It occupies a leading position among the materials for the manufacture of furniture. Every year, manufacturers are striving to improve the production of particle board, to increase the range of products the technology to satisfy even the most demanding needs of modern man.